10A/30A
1 / 6Pages

10A/30ASlip ring collector FEATURES • Suitable for transmitting current with 50/60 Hz frequency. • The enclosure has small downward holes for air circulation and to prevent problems due to moisture. • The lower support plate is provided with three holes to drain any moisture that may form inside the unit. • The enclosure is made of shock-resistant thermoplastic material to prevent contact with live electrical parts. • IP protection degree: collector 10A/30A is classified IP22. • Extreme temperature resistance: -25°C to +70°C. Slip ring collector consisting of rings coupled with brushes, designed to allow current to pass from a fixed to a rotating part and used to supply crane motors and cable winders. OPTIONS c q3 "O • Up to 40 rings coupled with brushes. • Available with 30A line rings only or with 30A line rings and 10A auxiliary rings. • Fitted with phosphor bronze or graphite brushes. * ■o CERTIFICATIONS a> ai -O _=3 • CE marking and EAC certification. c co a> =3 =3 o Fill in the ‘request form" for accurate product configuration. & 8 .22 co a> £ S “D _C a> c 8 .2 P a = o ~ i1 P “D O >_ "a> os

POSSIBLE ASSEMBLIES Standard (section view) CERTIFICATIONS Conformity to Community Directives

STANDARD SLIP RING COLLECTORS AND OVERALL DIMENSIONS (mm)

ASSEMBLY DRAWING Refer to the following tables for descriptions of components: “Brushes and rings”, “Cable clamps” and “Accessor

Brushes and rings Ref. Drawing Cable clamps Ref. Drawing Cable clamp support Cable clamp M20 Cable clamp M25 Ring - pitch 1.5 Cover - 1 hole Upper plate Lower plate

10A/30A - REQUEST FORM FOR NON STANDARD SLIP RING COLLECTOR Rings No. of30A rings No. of 10A rings OPhosphor bronze Tube length Cable clamps Instructions - Write the number of 30A and 10A rings and the type of brushes required. - Write the input and output length of the tube required, when different from the length showed in the overall dimensions. - Write the type of cable clamps required on the upper cover and on the lower plate.