TQ-60-X Advanced phased array ultrasonic flaw detector TQ-60-X Advanced phased array ultrasonic flaw detector Brochure UT Phased Array Technology combined with TOFD solution for Automated Ultrasonic Testing (AUT) and Mechanical Ultrasonic Testing (MAUT) as well as manual UT inspection

TQ-60-X Advanced phased array ultrasonic flaw detector

TQ-60-X Advanced phased array ultrasonic flaw detector The TQ-60-X is a cutting-edge ultrasonicflaw detector that integrates phased array (PA) technology with Time-of-Flight Diffraction (TOFD). This high-performance device is designed for simultaneous operation with two 64-channel phased array probes and various scanners, including roller scanners, PA + TOFD scanners, and more. With an S-scan generation speed of 100 Hz, it allows scanning welds from both sides at speeds ranging from 6 to 9 meters per minute, increasing the detectability and reliability of inspection. • Different operation modes...

TQ-60-X Advanced phased array ultrasonic flaw detector Various image modes for results analysis and interpretation Different viewing modes allows analysis capabilities on the flaw detector screen: S-scan, scan at a fixed angle L-scan, LS-scan combining classical S-scan with movement along the aperture of the phased array, A-, B-, C-scans. Full screen mode for the utmost detailing of signals during inspections. High brightness of TFT screen and high processing speed show signals with all the details in real-time mode with high resolution, so the operator can easily differentiate one defect from...

TQ-60-X Advanced phased array ultrasonic flaw detector Advanced functionality for weld inspection The flaw detector allows operation with 2 x 64 element PA probes simultaneously, enabling 2-sided inspection of welds. This significantly increases detectability of the defects. Multigroup function for PA Each PA can be divided into 4 groups with different focus areas, individual signal type, scan type, generator parameters etc for enlarged weld zones coverage settings, providing 4 live scans on the display. Rich options for scanning direction and focusing zones. Weld Wizard for easy and convenient...

TQ-60-X Advanced phased array ultrasonic flaw detector Scanning constructor for visualization of beam paths in the object. This allows to set the penetration parameters like group of elements, type of scanning, scanning step, focusing area etc. to be used for inspection and get the image of object coverage. Easy scanner configurator Simple and visual scanner configurator to setup the inspection scheme. The operator can configure simultaneous operation with up to 2 x phased array probes and 2 x pairs of TOFD, at that each PA probe can be splitted up to four independent groups on each of the phased...

TQ-60-X Advanced phased array ultrasonic flaw detector Additional features Angle Correction Gain and TCG functions for an immediate and accurate assessment of the equivalent defect size. Detailed TOFD data review on the display of the flaw detector. i-Scan mode for inspection of composites and corrosion mapping. C-scan recording for linear phased array probe with direct, soft or immersion wedge and for roller probe for reconstruction of the backwall thickness map and composite inspection.

TQ-60-X Advanced phased array ultrasonic flaw detector Connectivity with automated and mechanical scanners* AutoWeldScan fully automated scanner for Girth weld inspection Lightweight (3.5 kg) 2-Motor scanner with floating semi-independent suspension allows reliable data acquisition in most difficult conditions without bondage, compensates for the irregularity of the surface, different thicknesses of weld edges. Allows configuration up to 2 x PAs + 2 x 2 TOFD. Easy manipulation from the remote control in 4 directions. Fully automated version contains intellectual system for positioning the scanner...

TQ-60-X Advanced phased array ultrasonic flaw detector Technical specifications PHASED ARRAY Generator configuration: 16:128 (optionally 32:128) Number of channels: 4 channels (2 pulsers / 2 receivers) Excitation pulse type: RF Pulse Processing: A-Scan, B-Scan, TOFD Synchronization: position or time encoder Gain: 0–80 dB in 0.1 dB steps Rectification FW, HW+, HW–, and RF gain: 0-110 dB in steps of 0.1, 0.5, 1, 2, and 6 dB Operating frequency range: 500 kHz — 20 MHz Operating frequency range: 500 kHz — 20 MHz ADC bit depth: 10 bits Data bit depth: 16 bits GENERAL FEATURES Signal recording: digital...

TQ-60-X Advanced phased array ultrasonic flaw detector TEQTO Estonia Ltd Reg. N 16476638 EU VAT: EE102483538 Phone: +372 553 6202 Mail: [email protected] www.teqto.pro