ED-45 EDDY-CURRENT FLAW DETECTOR The magnetic-eddy-current flaw detector VID-345 is intended for detecting and measuring of depths of stress-corrosion fractures in ferromagnetic structures as well as fractures under the insulating coating and/or corrosion layer. The device can also monitor thickness of the insulating coating on the controlled items. The flaw detector operation is based on a combination of the magnetic and eddy-current methods that enable the user to monitor items with coarse and corroded surface and measure through a layer of insulating coating of varying thickness. Shock-resistant housing ► Pipes, pipelines, ► Containers, pressure vessels, ► Oil - and gas pipelines, ► Power supply industry items, parts of structures and machinery. ► Searching for stress-corrosion fractures, with simultaneous detection of their depth and monitoring the thickness of the insulating coating - used if the thickness of insulating coating is from 0 to 4 mm. ► Searching for stress-corrosion fractures - used when the thickness of insulating coating is to 10 mm.

► Detection and depth measurement of stress-corrosion fractures, simultaneously monitoring thickness of the insulating coating and/or corrosion layer. ► Continuous monitoring of the thickness of insulating coating. ► Operational adjustment of the operating modes of the device. ► Metallic housing of electronic unit for use in severe field conditions. ► The contact surface of the sensors is made of abrasion resistant zirconium ceramics. ► Signalization of the defect detection: lighting, audio signaling through speakers or headphones. ► Capability to use additional changeable sensors. Minimum crack...