T-Series - TH SSI Magnetostrictive Linear Position Sensors I ATEX/UK Ex/IECEx/CEC/NEC/KCs/CCC/PESO certified/Japanese approval I Continuous operation under harsh industrial conditions I Flameproof/Explosionproof/Increased safety

Temposonics® TH SSI Data Sheet MEASURING TECHNOLOGY The absolute, linear position sensors provided by Temposonics rely on the company’s proprietary magnetostrictive technology, which can determine position with a high level of precision and robustness. Each Temposonics® position sensor consists of a ferromagnetic waveguide, a position magnet, a strain pulse converter and a supporting electronics. The magnet, connected to the object in motion in the application, generates a magnetic field at its location on the waveguide. A short current pulse is applied to the waveguide. This creates a momentary...

Data Sheet See next page for “Electrical connection” 1/ With standard one shot of 16 ms 2/ With position magnet # 201 542-2 3/ If there is contact between the moving magnet including the magnet holder and the sensor rod, make sure that the maximum speed of the moving magnet is < 1 m/s (Safety requirement due to ESD [Electro Static Discharge]) 1 3 1

Temposonics® TH SSI Data Sheet Electrical connection Connection type T-Series terminal Operating voltage Current consumption Dielectric strength 700 VDC (DC ground to machine ground) Polarity protection Overvoltage protection

Data Sheet Certification required Version E Version D Version G Version N PESO Ex db eb IIC T4 Ga/Gb Ex db eb IIC T4 Ga/Gb Ex db eb IIC T4 Ga/Gb No hazardous (India) Ex tb IIIC T130°C Ga/Db Ex tb IIIC T130°C Ga/Db Ex tb IIIC T130°C Ga/Db area approval Zone 0/1, Zone 21 Zone 0/1, Zone 21 Zone 0/1, Zone 21

Temposonics® TH SSI Data Sheet TECHNICAL DRAWING Threaded flange with raised-face Null zone 51 (2.01) 22.5 (0.89) Version D: A/F 55 Version G: A/F 60 Version G 82 (3.23) See order code section “d” for connection types Sensor electronics housing 112.5 (4.43) 2.5 (0.1) Sensor electronics housing 112.5 (4.43) Refer to “Table 1” for “TH rod sensor threaded flange type references” on page 7 Sensor electronics housing 132.5 (5.22) 2.5 “TH threaded flange type references” Referrod to sensor “Table 1” for “TH rod sensor threaded flange type references” on page 7 Strokelength length> >5000 5000mm mm(196.9...

Temposonics® TH SSI Data Sheet CONNECTION OPTIONS Side connection C01/N01 (with adapter)/M01 (without adapter) C01/N01: Connector on 6 different positions at 60° each Connection length 22 mm (0.87 in.) for version D & G 18 mm (0.7 in.) for version E & N Side connection Top connection C10/N10 (with adapter)/M10 (without adapter) Top connection Connection length 22 mm (0.87 in.) for version D & G 18 mm (0.7 in.) for version E & N Fig. 5: Temposonics® TH connection options Threaded flange type Threaded flange Threaded flange with flat-face ¾"-16 UNF-3A Stainless steel 1.4404 (AISI 316L) Threaded...

Temposonics® TH SSI Data Sheet ZONE CLASSIFICATION Version D & G (example: Threaded flange with raised-face) Flameproof (explosionproof) housing with flameproof (explosionproof) connection chamber Version D: ATEX / UK Ex / IECEx / CCC / PESO / Japanese Approval Version G: ATEX / UK Ex / IECEx / CEC / NEC / CCC / PESO / Japanese Approval Zone 0 Version E (example: Threaded flange with raised-face) Flameproof housing with increased safety connection chamber ATEX / UK Ex / IECEx / CCC / PESO / Japanese Approval Zone 0 Fig. 6: Temposonics® TH Zone classification NOTICE Seal sensor according to ingress...

Data Sheet CONNECTOR WIRINGVersion D & G suitable for connection types: C01, C10, N01, N10 Signal + power supply Fig. 7: TH (version D & G) wiring diagram (2.5 mm2 conductor) Fig. 8: TH (version E & N) wiring diagram (1.5 mm2 conductor)

Temposonics® TH SSI Data Sheet FREQUENTLY ORDERED ACCESSORIES – Additional options available in our Accessories Guide Position magnets Ring magnet OD33 Part no. 201 542-2 Ring magnet OD25.4 Part no. 400 533 Material: PA ferrite GF20 Weight: Approx. 14 g Surface pressure: Max. 40 N/mm2 Fastening torque for M4 screws: 1 Nm Operating temperature: −40…+105 °C (−40…+221 °F) Material: PA ferrite Weight: Approx. 10 g Surface pressure: Max. 40 N/mm2 Operating temperature: −40…+105 °C (−40…+221 °F) Material: PA ferrite GF20 Weight: Approx. 11 g Surface pressure: Max. 40 N/mm2 Fastening torque for M4 screws:...

Data Sheet Material: Stainless steel 1.4571 (AISI 316 Ti) Weight offset: Yes Pressure: 4 bar (60 psi) Magnet offset: Yes Specific gravity: Max. 0.6 Operating temperature: Material: Stainless steel 1.4571 (AISI 316 Ti) Weight offset: Yes Pressure: 4 bar (60 psi) Magnet offset: Yes Specific gravity: 0.93 ± 0.01 Operating temperature: -40...+125 °C (-40...+257 °F) Material: Stainless steel (AISI 316L) Weight offset: Yes Pressure: 29.3 bar (425 psi) Magnet offset: No Specific gravity: 0.93 ± 0.01 Operating temperature: Material: Stainless steel (AISI 316L) Weight offset: Yes Pressure: 29.3 bar (425...

Temposonics® TH SSI Data Sheet O-ring for threaded flange M18×1.5-6g Part no. 401 133 O-ring for threaded flange ¾"-16 UNF-3A Part no. 560 315 Programming kit Part no. 253 135-1 (EU) Part no. 253 310-1 (US) Material: Fluoroelastomer Durometer: 75 ± 5 Shore A Operating temperature: −40…+204 °C (−40…+400 °F) Material: Fluoroelastomer Durometer: 75 ± 5 Shore A Operating temperature: −40…+204 °C (−40…+400 °F) Kit includes: 1 × interface converter box, 1 × power supply 1 × cable (60 cm) with M16 female connector (7 pin), straight – D-sub female connector (9 pin), straight 1 × cable (60 cm) with 6 ×...