
Data Sheet R-Series V RF5 PROFINET Magnetostrictive Linear Position Sensors Flexible sensor rod with improved features Stroke length up to 20 m Field adjustments and diagnostics using the TempoLink® and TempoGate® smart assistants
Open the catalog to page 1Temposonics® R-Series V RF5 PROFINET Data Sheet MEASURING TECHNOLOGY Position magnet (magnetic field) 2 The absolute, linear position sensors provided by Temposonics rely on the company’s proprietary magnetostrictive technology, which can determine position with a high level of precision and robustness. Each Temposonics® position sensor consists of a ferromagnetic waveguide, a position magnet, a strain pulse converter and supporting electronics. The magnet, connected to the object in motion in the application, generates a magnetic field at its location on the waveguide. A short current pulse...
Open the catalog to page 2Temposonics® R-Series V RF5 PROFINET Data Sheet ADVANTAGES OF THE R-SERIES V RF5 COMPARED TO THE R-SERIES V RFV R-Series V RFV (previous design) R-Series V RF5 (improved design) The first magnetostrictive sensor with a flexible sensor rod was developed and introduced to the market by Temposonics over 25 years ago. With this experience, we have further developed the sensor to improve handling in your application. The R-Series V RF5 offers you the following advantages: Shortened non-flexible area • Compared to the previous design, the non-flexible area of the RF5 has been reduced by more than 70...
Open the catalog to page 3Data Sheet Data protocol Linear profile and encoder profile V4.2 Data transmission rate 100 MBit/s (maximum) Measured value Position, velocity/option: Simultaneous multi-position and multi-velocity measurements up to 30 magnets Resolution: Position Cycle time 1 Temperature coefficient Operating conditions Operating temperature Humidity Ingress protection Shock test Vibration test Magnet movement velocity 90 % relative humidity, no condensation IP68 (3 d/3 m) (connectors and flange correctly fitted) 100 g/6 ms, IEC standard 60068-2-27 (when guided in a support pipe, e.g. sensor rod HD/HL/HP) 5...
Open the catalog to page 4Data Sheet Stroke length Note: Tolerance of total length has no influence on the stroke length. RF5-B - RF5 base unit (without flange & rod assembly), example: Connection type D58 (connector outlet) 17 Dead zone see table Stroke length Note: Tolerance of total length has no influence on the stroke length. Controlling design dimensions are in millimeters and measurements in () are in inches Fig. 2: Temposonics’ RF5
Open the catalog to page 5Temposonics® R-Series V RF5 PROFINET Data Sheet Power supply M12 male connector (A-coded) Power supply
Open the catalog to page 6Temposonics® R-Series V RF5 PROFINET Data Sheet FREQUENTLY ORDERED ACCESSORIES – Additional options available in our Accessories Catalog Position magnets Ring magnet OD60 Part no. MT0162 Ring magnet Part no. 402 316 Material: PA ferrite GF20 Weight: Approx. 11 g Surface pressure: Max. 40 N/mm2 Fastening torque for M4 screws: 1 Nm Operating temperature: −40…+105 °C (−40…+221 °F) Material: AlCuMgPb, magnets compound-filled Weight: Approx. 90 g Surface pressure: Max. 20 N/mm2 Fastening torque for M4 screws: 1 Nm Operating temperature: −40…+75 °C (−40…+167 °F) Material: PA ferrite coated Weight:...
Open the catalog to page 7Data Sheet
Open the catalog to page 8Data Sheet M12 D-coded male connector M12 connector end M12 A-coded female connector M8 female connector (4 pin), straight (4 pin/5 pin), straight Part no. 370 504 Material: Zinc nickel-plated Termination: Insulation-displacement Cable 0: 6...7.2 mm (0.2...0.28 in.) Wire: 24 AWG - 22 AWG Operating temperature: Ingress protection: IP65 / IP67 (correctly fitted) Female connectors M12 should be covered by this protective cap Material: Brass nickel-plated Ingress protection: IP67 (correctly fitted) Fastening torque: 0.39.0.49 Nm Termination: Screw Contact insert: CuZn Operating temperature: Ingress...
Open the catalog to page 9Data Sheet Cable sets Programming tools Power cable with M12 A-coded female connector (5 pin), straight - pigtail Part no. 370 673 Power cable with M8 female connector (4 pin), straight - pigtail TempoGate® smart assistant for Temposonics® R-Series V Part no. TG-C-0-D// (xx indicates the number of R-Series V sensors that can be connected (even numbers only)) Material: PUR jacket; gray Feature: Shielded Cable 0: 5 mm (0.2 in.) Operating temperature: Material: PUR jacket; black Feature: Shielded Cable length: 5 m (16.4 ft) Ingress protection: IP67 (correctly fitted) Operating temperature: • Connect...
Open the catalog to page 10ORDER CODE D <]□ Sensor model R F 5 Flexible rod Design B Base unit (without flange & rod assembly) Section cl is intentionally omitted. Stroke length Stroke length (mm) Ordering steps Temposonics® R-Series V RF5 PROFINET Data Sheet Connection type D 5 8 e connectors (D-coded), 1 x M12 male connector (A-coded) U 4 0 2 PROFINET RT & IRT, position and velocity, linear profile (1.30 magnet(s)) U 4][0][1] PROFINET RT & IRT, position and velocity, encoder profile (1 magnet) Stroke length (in. Ordering steps Non standard stroke lengths are available; must be encoded in 5 mm/0.1 in. increments Number...
Open the catalog to page 11Temposonics® R-Series V RF5 PROFINET Data Sheet Encoder Profile GLOSSARY The encoder profile corresponds to the specification of the encoder profile V4.2 (PNO no. 3.162). With this profile, the position and Ethe velocity of one magnet can be measured and transferred simultaneously. Encoder Profile ( Linear Profile) Extrapolation The encoder profile corresponds to the specification of the encoder The cycleWith timethis of aprofi sensor increases profinative le V4.2measurement (PNO no. 3.162). le, the positionwith andthe stroke length. extrapolation, sensor and is able to report data the velocity...
Open the catalog to page 12UNITED STATES Americas & APAC Region Phone: +1 919 677-0100 E-mail: [email protected] Document Part Number: 552211 Revision A (EN) 07/2026 Temposonics 58513 Lüdenscheid GmbH & Co. KG Phone: +49 2351 9587-0 EMEA Region & India E-mail: [email protected] ITALY Phone: +39 030 988 3819 Branch Office E-mail: [email protected] FRANCE Phone: +33 6 14 060 728 Branch Office E-mail: [email protected] UK Phone: +44 79 21 83 05 86 Branch Office E-mail: [email protected] SCANDINAVIA Phone: + 46 70 29 91 281 Branch Office E-mail: [email protected] CHINA Phone: + 86 21 3405...
Open the catalog to page 134 Pages
17 Pages
12 Pages
16 Pages
17 Pages
15 Pages
15 Pages
10 Pages
7 Pages
7 Pages
7 Pages
10 Pages
10 Pages
4 Pages
4 Pages
7 Pages