MH-Series SLIMMagnetostrictive Linear Position Sensors I Embedded and external threaded options I Stroke lengths up to 600 mm I For short stroke cylinders with compact pin-to-pin distance I CANbus output I Voltage output - scheduled Q4 2026

Temposonics® MH-Series SLIM Data Sheet The absolute, linear position sensors provided by Temposonics rely on the company’s proprietary magnetostrictive technology, which can determine position with a high level of precision and robustness. Each Temposonics® position sensor consists of a ferromagnetic waveguide, a position magnet, a strain pulse converter and supporting electronics. The magnet, connected to the object in motion in the application, generates a magnetic field at its location on the waveguide. A short current pulse is applied to the waveguide. This creates a momentary radial magnetic...

Data Sheet TECHNICAL DATA ANALOG - Q4 2026 FULL RELEASEOutput Voltage 0.25...4.75 VDC / 0.5...4.5 VDC / 4.75...0.25 VDC / 4.5.0.5 VDC Measured value Position Power up time 250 ms (typical) Operating voltage 12/24 VDC nominal (8...32VDC) Min load resistance (output VDC) 10 kO Max Inrush current 4.5 A/2 ms (2.5 A/2 ms if supply > 13 V) Supply voltage ripple < 1 % PP Over voltage protection (GND-VDC) Up to +200 VDC Polarity protection (GND-VDC) Up to -200 VDC Electric strength 500 VDC (DC GND to chassis GND) */ Resonance frequencies excluded **/ According to calculations under use of the FKM guideline...

Data Sheet Operating voltage 12/24 VDC nominal (8...32 VDC) Max Inrush current 1.5 A/2 ms (1.0 A/2 ms if supply > 13 V) Supply voltage ripple < 1 %PP Over voltage protection (GND-VDC) Up to +200 VDC Polarity protection (GND-VDC) Up to -200 VDC Electric strength 500 VDC (DC GND to chassis GND) */ Resonance frequencies excluded **/ According to calculations under use of the FKM guideline Dynamic pressure: > 2 x 106 pressure cycles 350 bar Static pressure: > 2 x 104 pressure cycles 450 bar Proof pressure: Maximum 5 minutes testing time for cylinder pressure test 625 bar

Temposonics® MH-Series SLIM Data Sheet TECHNICAL DRAWING SM-D – Pressure fit flange Stroke length 100…600 SM-B/E – Threaded flange Null zone 43.2 Magnet 401032 Threaded flange »B«: ¾"-16 UNF-3A Threaded flange »E«: M18×1.5-6g Controlling design dimensions are in millimeters Fig. 3: Temposonics® MH-Series SLIM Sensor NOTICE Installation Manual for MH-Series SLIM Sensors (document par

Temposonics® MH-Series SLIM Data Sheet (1) DT connector system (A...E/A...G/A...H) & (2) Interconnect without DT connector system (W...E/W...G/W...H) Controlling design dimensions are in millimeters

Cable outlet with DT04-4P style connector (F...E/F...G/F...H) 60...240 100...1000 Controlling design dimensions are in millimeters Temposonics® MH-Series SLIM Data Sheet • Attached DT04-4P style connector • Toolless Assembly • Sealing IP 67, up to IP69K with mating con nector • Single lead wires, 3 x 0.5 mm2 • Toolless Assembly

Temposonics® MH-Series SLIM Data Sheet Single lead wires 0.22 mm2 4 pin DT style connector Toolless Assembly Sealing IP67, up to IP69K with mating connector Connector wiring Single lead wires 0.22 mm2 Attached A-coded M12 connector Toolless Assembly Sealing IP67, up to IP69K with mating connector Cable with M12 connector outlet (Q...F) Attached A-coded M12 connector Sealing IP67, up to IP69K with mating connector Connector wiring Controlling design dimensions are in millimeters

Temposonics® MH-Series SLIM Data Sheet Cable outlet with DT04-4P style connector (F...S) • Single lead wires 0.5 mm2 • Toolless Assembly Controlling design dimensions are in millimeters

Data Sheet Sensor model S M MH-Series SLIM Order code continued on next page

Temposonics® MH-Series SLIM Data Sheet Position sensor O-ring Backup-ring (pressure fit flanges only) M12 connector system with M12 flange (when option selected) DT connector system with connector assembly and retainer (when option selected) Accessories (e.g. position magnets) have to be ordered separately

Data Sheet Electrical wiring 60.. .240 mm wire length (in 20 mm steps) Example wire length A06S = 60 mm Connector wiring S: 1-3-4-2 Interconnect without DT connector 60.240 mm wire length (in 20 mm steps) Example wire length W06S = 60 mm Connector wiring S: 1-3-4-2 M12 connector without flange (VDC - GND - HI - LO) g |^| 60.240 mm wire length (in 20 mm steps) Example wire length K06F = 60 mm Connector wiring: F: 2-3-4-5 M12 connector with flange (VDC - GND - HI - LO) 60.240 mm wire length (in 20 mm steps) Example wire length N06F = 60 mm Connector wiring: F: 2-3-4-5 Single wires 60.240 mm wire...

Temposonics® MH-Series SLIM Data Sheet DELIVERY • Position sensor Accessories (e.g. position • O-ring magnets) have to be ordered • Backup-ring (pressure fit separately flanges only) • M12 connector system with M12 flange (when option selected) • DT connector system with connector assembly and retainer (when option selected) Manuals, Software & 3D models available at: www.temposonics

Temposonics® MH-Series SLIM Data Sheet FREQUENTLY ORDERED ACCESSORIES Position magnets Ring magnet OD17.4 Part no. 401 032 Ring magnet OD25.4 Part no. 400 533 Test kit Analog Part no. 280 618 Testkit CANbus Part no. 253 879 Material: PA neobond Weight: Approx. 5 g Surface pressure: Max. 20 N/mm2 Operating temperature: −40…+105 °C (−40…+221 °F) Material: PA ferrite Weight: Approx. 10 g Surface pressure: Max. 40 N/mm2 Operating temperature: −40…+120 °C (−40…+248 °F) Kit includes: 1 × MH-Series Analog / PWM Tester 1 × 12 VDC battery charger with adapter (adapter main plug EU, adapter main plug UK)...

Temposonics® MH-Series SLIM Data Sheet Cables Wiring Wires M12 A-coded female connector (5 pin) Cable with M12 A-coded female connector (5 pin), straight – pigtail Part no. 370 673 Material: PUR jacket; black Feature: Shielded Cable length: 5 m (16.4 ft) Ingress protection: IP67 (correctly fitted) Operating temperature: −25…+80 °C (−13…+176 °F) Wiring Wires Cable with M12 A-coded female connector (5 pin), angled – pigtail Part no. 370 675 Material: PUR jacket; black Feature: Shielded Cable length: 5 m (16.4 ft) Ingress protection: IP67 (correctly fitted) Operating temperature: −25…+80 °C (−13…+176...