- Catalogs
- Temposonics
- GB with threaded flange Analog
GB with threaded flange Analog
GB with threaded flange Analog
- Replaceable sensor elements and electronics to minimize maintenance costs.
- Programmable start and end positions tailored to application needs.
- 360-degree rotatable sensor electronics housing for adaptable connection orientation.
- Output: Voltage (0-10 VDC) and Current (4-20 mA).
- Resolution: 16-bit, with a minimum of 1 µm depending on stroke length.
- Operating Temperature: -40 to +90 °C, with options for different ranges.
- Ingress Protection: IP67/IP68.
- Operating Pressure: Up to 700 bar peak.
- Mounting: Snap-in mounting on standard 35 mm DIN rail.
- Programming: Features a program/run switch and can be permanently mounted in a control cabinet.
- Kit Components: Interface converter box, power supply, various cables with connectors, and a USB cable.
- Sensor Model: GB rod-style with housing material 1.4305 (AISI 303) and rod material 1.4306/1.4307 (AISI 304L).
- Flange Options: M18×1.5-6g flat-face or ¾"-16 UNF-3A raised-face.
- Stroke Length: Available in standard and non-standard lengths, with specific ordering steps for metric and US customary units.
- Connection Types: Options for M12 and M16 male connectors, and various cable types (PUR, FEP, Silicone).
- Operation Voltage: +24 VDC (−15/+20%).
- Output Options: Voltage and current outputs including 0…10 VDC, 4…20 mA, and others.
- Operating Temperature: Ranges from -40 to +100 °C (-40 to +212 °F).
- Programming: Via cable.
Catalog excerpts
GB with threaded flange Analog Magnetostrictive Linear Position Sensors I Sensor element and electronics can be changed I Flat & compact sensor electronics housing I Electrical connection is freely rotatable
Open the catalog to page 1
Temposonics® GB with threaded flange Analog Data Sheet MEASURING TECHNOLOGY The absolute, linear position sensors provided by Temposonics rely on the company’s proprietary magnetostrictive technology, which can determine position with a high level of precision and robustness. Each Temposonics® position sensor consists of a ferromagnetic waveguide, a position magnet, a strain pulse converter and supporting electronics. The magnet, connected to the object in motion in the application, generates a magnetic field at its location on the waveguide. A short current pulse is applied to the waveguide....
Open the catalog to page 2
Data Sheet Voltage 0...10 VDC and 10...0 VDC (minimum load controller: > 5 kQ) Current 4(0)...20 mA or 20.4(0) mA (minimum/maximum load: 0/500 Q) Programming Programming of set points using optional accessories Measured value Position 1/ The internal digital value is measured through a 16-bit D/A converter and transferred into a proportional, analog current or voltage signal. 2/ With position magnet # 251 416-2 3/ For option H ( -40...+100 °C /-40...+212 °F) an aluminum cover plate is used
Open the catalog to page 3
Magnet Magnet Temposonics® GB with threaded flange Analog Data Sheet TECHNICAL DRAWING Threaded flange »M«: Threaded flange »M«: M18×1.5-6g M18×1.5-6g M12 male connector (example: With flat-faced flange) Stroke length Stroke length 25…3250 25…3250 (1…128) (1…128) Dead zone Dead zone 63.5 63.5 (2.5) (2.5) Magnet Magnet Sensor electronics Sensor electronics housing housing 39 39 (1.54) (1.54) Threaded flange »M«: Threaded flange »M«: M18×1.5-6g M18×1.5-6g M16 male connector (example: With raised-faced flange) Dead zone Dead zone 63.5 63.5 (2.5) (2.5) Stroke length Stroke length 25…3250 25…3250 (1…128)...
Open the catalog to page 4
Data Sheet (A coded) Output Pin Voltage Current */ Connect the first output to DC Ground (0 V), if you only use the second output. Fig. 7: Connector wiring cable outlet for outputs V0, A4 HXX/TXX/VXX (for outputs: A0, A1, A2, A3 in order code) Fig. 8: Connector wiring cable outlet for outputs A0, A1, A2 and A3
Open the catalog to page 5
Temposonics® GB with threaded flange Analog Data Sheet FREQUENTLY ORDERED ACCESSORIES – Additional options available in our Accessories Catalog Position magnets Ring magnet OD33 Part no. 201 542-2 Ring magnet OD25.4 Part no. 400 533 Ring magnet OD17.4 Part no. 401 032 Material: PA ferrite GF20 Weight: Approx. 11 g Surface pressure: Max. 40 N/mm2 Fastening torque for M4 screws: 1 Nm Operating temperature: −40…+120 °C (−40…+248 °F) Material: PA ferrite GF20 Weight: Approx. 14 g Surface pressure: Max. 40 N/mm2 Fastening torque for M4 screws: 1 Nm Operating temperature: –40...+120 °C (–40...+248...
Open the catalog to page 6
Temposonics® GB with threaded flange Analog Data Sheet Cable connectors* M12 A-coded female connector (4 pin/5 pin), straight Part no. 370 677 M12 A-coded female connector (5 pin), angled Part no. 370 678 M16 female connector (6 pin), straight Part no. 370 423 M16 female connector (6 pin), angled Part no. 370 460 Material: GD-Zn, Ni Termination: Screw Contact insert: CuZn Cable Ø: 4…8 mm (0.16…0.31 in.) Wire: Max. 1.5 mm² (16 AWG) Operating temperature: −30…+85 °C (−22…+185 °F) Ingress protection: IP67 (correctly fitted) Fastening torque: 0.6 Nm Material: GD-Zn, Ni Termination: Screw Contact...
Open the catalog to page 7
Temposonics® GB with threaded flange Analog Data Sheet Programming tools Hand programmer for analog output Part no. 253 124 Cabinet programmer for analog output Programming kit Part no. 253 408 Part no. 254 555 Easy teach-in-setups of stroke length and direction on desired zero/span positions. For sensors with 1 magnet. Features snap-in mounting on standard DIN rail (35 mm). This programmer can be permanently mounted in a control cabinet and includes a program/run switch. For sensors with 1 magnet. Kit includes: 1 × interface converter box 1 × power supply 1 × cable (60 cm) with M12 female connector...
Open the catalog to page 8
Data Sheet ORDER CODE GB-M/GB-T: Sensor Accessories have to be ordered separately. Manuals, Software & 3D Models available at: www.temposonics.com
Open the catalog to page 9
Document Part Number: 551838 Revision D (EN) 07/2026 Amerika & APAC Region Telefon: +1 919 677-0100 E-Mail: [email protected] Temposonics 58513 Lüdenscheid GmbH & Co. KG Telefon: +49 2351 9587-0 EMEA Region & India E-Mail: [email protected] ITALIEN Telefon: +39 030 988 3819 Zweigstelle E-Mail: [email protected] FRANKREICH UK Telefon: +44 79 21 83 05 86 Zweigstelle E-Mail: [email protected] SKANDINAVIEN Telefon: + 46 70 29 91 281 Zweigstelle E-Mail: [email protected] CHINA Telefon: + 86 21 3405 7850 Zweigstelle E-Mail: [email protected] JAPAN Telefon: +81 3...
Open the catalog to page 10All Temposonics catalogs and technical brochures
C-Series OEM-Sensor Analog4 Pages
MH-Series COMPACT Analog/CANbus17 Pages
MH-Series SAFETY CANbus12 Pages
MH-Series SLIM16 Pages
MH-Series EMBEDDED CANbus17 Pages
T-Series – TH CANbus15 Pages
T-Series – TH SSI15 Pages
EH CANopen7 Pages
E-Series EH IO-Link7 Pages
EH SSI7 Pages
G-Series V GH5 Analog10 Pages
R-Series V RF5 PROFINET13 Pages
Level Plus® Model LLE10 Pages
C-Series OEM-Sensor PWM4 Pages
C-Series OEM-Sensor Analog4 Pages
Archived catalogs
EP/EL7 Pages
- Level probe
- Liquid level sensor
- Analog level sensor
- Displacement transducer
- Digital output level sensor
- Linear displacement sensor
- Vessel level sensor
- Temposonics analog position sensor
- Liquids level gauge
- Temposonics non-contact position sensor
- Stainless steel level sensor
- Temposonics magnetic position sensor
- Temposonics industrial position sensor
- Temposonics metal position sensor
- Explosion-proof level sensor
- Temposonics IP67 position sensor
- Electronic level gauge
- Temposonics compact position sensor