EP/EL
7Pages

Data Sheet EP / EL Analog Magnetostrictive Linear Position Sensors For standard applications Position measurement with more than one magnet Ideal for limited installation space

Temposonics® EP / EL Analog Data Sheet MEASURING TECHNOLOGY The absolute, linear position sensors provided by Temposonics rely on the company’s proprietary magnetostrictive technology, which can determine position with a high level of precision and robustness. Each Temposonics position sensor consists of a ferromagnetic waveguide, a position magnet, a strain pulse converter and supporting electronics. The magnet, connected to the object in motion in the application, generates a magnetic field at its location on the waveguide. A short current pulse is applied to the waveguide. This creates a...

Temposonics® EP / EL Analog Data Sheet TECHNICAL DATA Output Voltage 0…10 VDC or 10…0 VDC, 0…10 VDC and 10…0 VDC (controller input resistance RL > 5 kΩ) 4…20 mA or 20…4 mA (minimum / maximum load: 0  /  500 Ω) Measured variable Position / option: multi-position measurement (2 positions) Measurement parameters Resolution Cycle time Typ. 0.3 ms < t < 2 ms (depending on stroke lengths) Magnet slider: ≤ ±0.02 % F.S. (minimum ±60 μm), U-magnet: ≤ ±0.02 % F.S. (minimum ±60 μm), block magnet: ≤ ±0.03 % (minimum ±90 µm) Operating conditions Operating temperature Ingress protection  IP67 (if mating...

TECHNICAL DRAWING Temposonics® EP * 14.6 (*) (0.57) * Start position Magnet slider S: 19 (0.75) Magnet slider V: 19 (0.75) U-magnet OD33: 35 (1.38) Block magnet L: 35 (1.38) Mounting clamps Start position: Magnet slider S: 19 (0.75) Magnet slider V: 19 (0.75) Block magnet L: 35 (1.38) * Controlling design dimensions are in millimeters and measurements in ( ) are in inches CONNECTOR WIRING D34 M12 A-coded

Temposonics® EP / EL Analog Data Sheet FREQUENTLY ORDERED ACCESSORIES – Additional options available in our Accessories Guide Position magnets 8 ± 2 (0.31 ± 0.08) Distance to sensor element Magnet slider S Part no. 252 182 Magnet slider V Part no. 252 184 Block magnet L Part no. 403 448 Material: GFK, magnet hard ferrite Weight: Ca. 35 g Operating temperature: −40…+75 °C (−40…+167 °F) Material: GFK, magnet hard ferrite Weight: Ca. 35 g Operating temperature: −40…+75 °C (−40…+167 °F) Only for: EP Material: PA ferrite GF20 Weight: Ca. 11 g Operating temperature: −40…+105 °C (−40…+221 °F)...

Without position magnet (order separately) Stroke length Compact profile Sensor model Standard stroke length (mm)* Stroke length Ordering steps Standard stroke length (in.)* Stroke length Ordering steps d Connection type 4 M12 (5 pin) male connector Operating voltage DELIVERY • Sensor • 2 mounting clamps up to 1250 mm (50 in.) stroke length + 1 mounting clamp for each 500 mm (20 in.) additional stroke length 1 0…10 VDC (1 output channel with 1 position magnet) 1 10…0 VDC (1 output channel with 1 position magnet) 2 0…10 VDC (2 output channels with 2 position magnets) 2 10…0 VDC (2 output...

UNITED STATES Sheldon Drive UNITED STATES 30013001 Sheldon Drive MTS Systems Corporation Cary, N.C. 27513 Temposonics, LLC Cary, N.C. 27513 Sensors Division Phone: +1 919 677-0100 Americas & APAC Region Phone: +1 919 677-0100 E-mail: info.us@mtssensors.com E-mail: info.us@temposonics.com Document Part Number: 551245 Revision G (EN) 03/2018 GERMANY Auf Schüffel 9 GERMANY Auf dem dem Schüffel 9 MTS Sensor Technologie 58513 Lüdenscheid Temposonics 58513 Lüdenscheid GmbH & Co. Phone: +49 2351 9587-0 GmbH & Co. KG KG Phone: +49 2351 9587-0 E-mail: info.de@mtssensors.com EMEA Region & India...