E-Series EH lO-LinkMagnetostrictive Linear Position Sensors I High pressure resistant sensor rod I Position and velocity measurements with multiple magnets I Small & compact - Ideal for standard hydraulic cylinders

Temposonics® E-Series EH IO-Link Data Sheet MEASURING TECHNOLOGY Position magnet (Magnetic field) 2 The absolute, linear position sensors provided by Temposonics rely on the company’s proprietary magnetostrictive technology, which can determine position with a high level of precision and robustness. Each Temposonics position sensor consists of a ferromagnetic waveguide, a position magnet, a strain pulse converter and a supporting electronics. The magnet, connected to the object in motion in the application, generates a magnetic field at its location on the waveguide. A short current pulse is...

Output Temposonics® E-Series EH lO-Link Data Sheet Interface Digital Transmission protocol lO-Link V1.1 Data format Standard single-postion measurement: 32 bit signed (position in pm) Advancded single-position measurement and multi-position measurement: 8 x 32 bit signed (position in pm, velocity in pm/s) Data transmission rate COM3 (230.4 kBaud) Process data device - master Standard single-postion measurement: 4 bytes Advancded single-position measurement and multi-position measurement: 32 bytes Process data master - device 0 bytes Measured value Standard single-postion measurement: Position...

Temposonics® E-Series EH IO-Link Data Sheet TECHNICAL DRAWING EH with threaded flange M18×1.5-6g or ¾"-16 UNF-3A Sensor electronics housing 13 48 (0.51) (1.89) Controlling design dimensions are in millimeters and measurements in ( ) are in inches Fig. 2: E-Series EH with ring magnet CONNECTOR WIRING D44 Signal + power supply M12 male connector 3 4

Temposonics® E-Series EH lO-Link Position magnets Controlling design dimensions are in millimeters and measurements in () are in inches Color of connectors and cable jacket may change. Colors of the cores and technical properties remain unchanged.

Temposonics® E-Series EH lO-Link Data Sheet ORDER CODE Connection type Stroke length g Advanced single-position measurement or multi-position measurement (optional)_ |~T||~^||~^| Number of magnets 01.04 position and velocity (1.4 magnet(s)) 01.08 position (1.8 magnet(s)) • The number of magnets is limited by the stroke length. The minimum allowed distance between magnets (i.e. front face of one to the front face of the next one) is 75 mm (3 in.). • Use magnets of the same type for multi-position measurement. Standard stroke length (mm) Ordering steps Accessories have to be ordered separately....

UNITED STATES Americas & APAC Region Phone: +1 919 677-0100 E-mail: [email protected] Document Part number: 551816 Revision B (EN) 05/2026 Temposonics 58513 Lüdenscheid GmbH & Co. KG Phone: +49 2351 9587-0 EMEA Region & India E-mail: [email protected] ITALY Phone: +39 030 988 3819 Branch Office E-mail: [email protected] FRANCE Phone: +33 6 14 060 728 Branch Office E-mail: [email protected] UK Phone: +44 79 21 83 05 86 Branch Office E-mail: [email protected] SCANDINAVIA Phone: + 46 70 29 91 281 Branch Office E-mail: [email protected] CHINA Phone: +86 21 2415...