tempbase.®-D
14Pages

® For tempbase.®-D V3 - Data Management Software tempbase.®-D V3 Data Management Software O Summary Theme Page imec Messtechnik GmbH Germany © imec Messtechnik GmbH ■ V5.0-03/2017-EN ■ Technical Changes and Errors excepted

User Manual For tempbase.®-D V3 Software 01. Product Overview tempbase.®-D data management software for tempmate.®-M1 and tempmate.®-S1 V2 can program the logger, upload every recorded data to computer, systematically analyze or collect and manage the data. 02. Installation Environment 02.1 System Requirements CPU: min. PII 600 Mhz Hard disk: min. 100 Mb Memory: min. 512 Mb 03. Main Functions 03.1 Main Interface 2 imec Messtechnik GmbH Germany info@imec-group.com www.imec-group.com © imec Messtechnik GmbH · V5.1-05/2017-EN · Technical Changes and Errors excepted

User Manual For tempbase.®-D V3 Software Tool Buttons Stop by software: Stopping of the logging operation is prevented and the logger can only be stopped by tempbase.®-D software. *only for S1 V2 or M1 V1.3 Even if the tempmate.®-S1 V2 is stopped, the logger is still recording until the memory is full, or battery is low. The „Backup-Log“ can be generated by tempbase.®-D software (V2.0 or newer) and is not visible on the logger itself. *only for S1 V2 Download recorded data from tempmate.® logger. Manual save data: If current data is not saved into tempbase.®-D, press this button to save it....

User Manual For tempbase.®-D V3 Software Parameter Information tempmate.® Data logger ID Record interval Time Zone Time Zone Probe Mode Temperature sensor type (internal or external) Start Mode Logger start mode (manual or timed) Temperature Type Temperature type (Celsius or Fahrenheit) Multiple Start/Stop Permit logger to be started or stopped for several times Start Delay Logger start delay time Pause Enable/Disable Permit/prohibit pause of logger Travel description Highest Temperature Stop mode-setting value Lowest Temperature Stop Mode (actual) Actual stop mode Stop Time Stop time...

User Manual For tempbase.®-D V3 Software Graph Stretch curve horizontally Swage curve horizontally Curve zoom in Curve zoom out Return curve to the original size Marking function in the curve Save the marking in the curve Marking event display function 5 imec Messtechnik GmbH Germany info@imec-group.com www.imec-group.com © imec Messtechnik GmbH · V5.1-05/2017-EN · Technical Changes and Errors excepted Modify alarm threshold dynamical

User Manual For tempbase.®-D V3 Software Table Display first page data Display previous page data Display next page data Display last page data 6 imec Messtechnik GmbH Germany info@imec-group.com www.imec-group.com © imec Messtechnik GmbH · V5.1-05/2017-EN · Technical Changes and Errors excepted

User Manual For tempbase.®-D V3 Software 03.2 Data Query Data Base View the detailed information of the selected logger Display all loggers which have exceeded upper/lower limit Display all recordingings (including the normal temperature data and over temperature data) Data management function Back to home page 7 imec Messtechnik GmbH Germany info@imec-group.com www.imec-group.com © imec Messtechnik GmbH · V5.1-05/2017-EN · Technical Changes and Errors excepted Delete the data of selected logg

User Manual For tempbase.®-D V3 Software 03.3 Data Management Backup or Restore Data backup (save data in the format of ELT) Data restore (Restore ELT file and read it by software) 8 imec Messtechnik GmbH Germany info@imec-group.com www.imec-group.com © imec Messtechnik GmbH · V5.1-05/2017-EN · Technical Changes and Errors excepted

User Manual For tempbase.®-D V3 Software 04. Parameter Setting 4.1 tempmate.®-M1 Shows the serial number of the connected device Adjust the time between the measuring points Calculates the maximum runtime until the storage is full (battery life excluded!) Choose whether internal or external sensor should be used Enable or disable password function (PDF can’t be read out without password) Choose a password with 6 digits or characters Right now • tempmate.®-M1 starts working after disconnecting Start by Button • tempmate.®-M1 starts after pressing “Start” for 5 seconds Timing • Start date and...

User Manual For tempbase.®-D V3 Software 13. Record Mode Select “Stop when full” or “Ring Buffer” Select “Stop by Button” or “Stop by Software“ Change the time zone (factory setting is UTC +00:00) Shows the battery status of the current device Setup the time the display is active Choose whether internal or external sensor should be used Enable • tempmate.®-M1 can be restarted after the device was stopped Disable • tempmate.®-M1 can’t be restarted without configuration after the device was stopped Enable or disable the “Pause” mode Choose the alarm setting between: No Alarm • No alarm...

User Manual For tempbase.®-D V3 Software 4.2 tempmate.®-S1 V2 Shows the serial number of the connected device Adjust the time between the measuring points Calculates the maximum runtime until the storage is full (battery life excluded!) Automatic report generation without stopping the logger Enable or disable password function for PDF and CSV (PDF or CSV can’t be read out without password) Choose a password with 6 digits (alpha-numeric) Right now • tempmate.®-S1 V2 starts working after disconnecting Start by Button • tempmate.®-S1 V2 starts after pressing “Start” for 5 seconds Timing •...

User Manual For tempbase.®-D V3 Software 13. Record Mode “Stop when full” is mandatory for tempmate.®-S1 V2 Select “Stop by Button” or “Stop by Software“ Change the time zone (factory setting is UTC +00:00) Shows the battery status of the current device Choose the alarm setting between: No Alarm • No alarm setting, only temperature recording Single Alarm • A single “over” and “below” alarm point can be set Multiple Alarm • Up to 3 “over” and 2 “under” alarm points can be set Enable or disable the desired alarm zones (depends on the chosen alarm setting) Choose the alarm temperature Choose...