® 2901 Hamilton Boulevard South Plainfield, NJ 07080 Tel: 908-757-8300 Fax: 908-757-9273 Temperature Indicators - Tempilstiks Product Data Sheet - Tempilstiks Product Description: Product Code: A range of temperature indicating crayons that will record the highest bracketed temperature reached by the Tempilstik. TS****/TSC****, (Where**** indicates rated temperature °F &°C) Standard Range: Temperature range covered by Tempilstiks is 38C/100F –1093ºC/2000F. Physical Properties: Shelf life: 3 years from the date of shipment Color: various* (*color is for identification purposes only) Melting point: as specified in each Tempilstik Weight: ~1lb/0.453kg per box of 10 Tempilstiks Applications: Determining surface temperatures during Determining operating temperatures • Welding and metal fabrication • Preheat • Interpass • Postweld heat treatment • Annealing • Stress relieving • Bearings • Transformers • Steam traps • Molds • PC board pre-heaters • Motors • Electronic components • Hydraulic systems • Commercial irons • Hot plates • Heat exchangers HOW TO USE Stroke the work piece during heating. When the rated temperature has been reached a distinct melt (smear) will become evident. Tempilstik will make a mark by melting at the point of contact once the surface reaches the specific temperature of the Tempilstik. Accuracy: +/- 1% of rated temperature This information contained herein is furnished without warranty of any kind. Employers should use this information only as a supplement to other information gathered by them and must make independent determinations of suitability and completeness of information from all sources to assure proper use of these materials and the safety and health of employees.