Guarantee for the highest quality Manufacturing & Offering Hot Runner Controllers to World's best company HOT RUNNER CONTROLL TempControls The Best Hot Runner Controller

Hot runner system is a devised method to produce products continuously by maintaining resin as melted state.The controller heats a sprueanda runner which serve as a route of melted resin to fill cavity in piastre injection mold TempControls series (TC) realizes a most precise temperature control behavior with an excellent performance processor and reinforces the heat radiation structure. And by adopting LCD touch screen(TC-3200 series), it improves user convenience rather than the existing products. Single Zone Type ■ Controlling precisely temperature with adopting new RID algorithm ■ Protecting...

Input Power Measurement Aocuracy Tuning Method Thermocouple Inputs Thermocouple Type Heater Outputs Control Zones ±0,3t: for the range 30”C to 40010 (TC-880 Series, Optional 30-500D) ±0.3’C for the range 3010 to 50010 (TC-3200 Series) Auto Tuning PID or Manual PID Control All Zones rated at 240 VAC. 15 Amps per zone standard Over voltage protection Short circuit protection for each zone (both legs fused) Alarms Open circuit heater Open circuit Fusefe) Open, Shorted or Reversed Thermooouple(s) TC-3200 series enables integration management easily because temperature controller and sequence injection...

i injection Timer controls to open & dose gate of a Hot Runner in order to have effect to remove weldline, adjust injection quantity of each gate, reduce damping force, minimize flow mark, etc. Single Gate Type Users can select output voltage of sequence timer either DC24V or AC 220V in order to have equal output voltage for solenoid input voltage With supporting A/B/C modes, users can set open & dose time of gate depending on user's various operating conditions ATimer detect any input voltages automatically like DC24V, AO ?0V, AC 220V, etc.

Main Power Supply Single Phase AC 90V ~ AV 250V (50/60Hz) (Free Vo«age Use) Injection Signal Input Power Supply IN DC 24-V1 AC 110V / AC 220V Solenoid Valve Voltage DC 24V / AC 220V Solenoid Valve Load DC 24V / Total 2A, AC220V / Total 2A Operation Conditions -lOTO'-SOt Mode Specification A / B / C Mode Control Solenoid Valve TS-780 : 8 Gates TS-910 : t ~ 18 Gates (Optional 40 Gates) Features ■ Easy controlling and indentifying the operation status of 8 gates ■ 7 segment type display ■ Manual output function ■ Compact size, Light weight Multi Gate Type Features ■ Easy monitoring the operation...

■ Combination Power & Thermocouple Cable ■ Standard Size ( 3 Types ) 6 ZONE Size : 500 X 350 X 400 (mm) 8 ZONE Size : 600 X 350 X 400 (mm) 12 ZONE Size : 800 X 350 X 400 (mm) - Possible to Change ( Optional) ■ Hood ■ Housing Housing 24Pin (1 & 2 Lever Type) Harting Connector 24Pin ( Female / Male Type ) ( Angle / Straight Type ) Housing l6Pin ( 1 & 2 Lever Type ) Halting Connector 16Pin ( Female / Male Type } (Angle / Straight Type )

Mmmfi l PG 29 ( Metal Type ) Capacity: 250V 15A ON /OFF Type DPST 4Pin ■ Circuit Breaker & Power switch Company Name: Giovenzana Model: SE 100 Series 4Pole 100A Company Name: S.T Capacity: 40A Company Name : SUNON The name of product: AC FAN Model: DP 200A Size : 12Cm x 12Cm Company could be changed without notice

TempControls The Best Hot Runner Controller #408, Byuksan digital valley 1,212-16, Guro 3-dong, GurD-gu, seoul Further inquries and development suggetions, please email to [email protected] * http://www.tennpcontrols.co.kr http://www.tempcube.com