Output Conversion Modules
Output Conversion Modules
The Tempatron output conversion modules are designed to convert SSR output signals from digital temperature or process controllers into either analogue or relay outputs. The modules are compact, DIN rail mountable, and powered by 24Vac.
Models Available
- CONV0/10A0: Converts 10Vdc PWM signal to 0-10Vdc or 4-20mA output.
- CONVONOFF0: Converts 10Vdc PWM signal to an on/off relay output.
Product Features
- Converts SSR control signals.
- Provides 0-10Vdc or 4-20mA analogue output.
- Offers on/off relay output.
- Powered by 24Vac auxiliary power.
- IP40 enclosure code.
- DIN rail mounting.
Specifications
- Power Supply Voltage: 24Vac (±10%)
- Burden: <50mA for CONV0/10A0, <30mA for CONVONOFF0
- Frequency: 50/60Hz
- Input: 10Vdc PWM for CONV0/10A0, 10Vdc On/Off for CONVONOFF0
- Output: 0-10Vdc or 4-20mA for CONV0/10A0, single pole changeover contact for CONVONOFF0
- Operating Temperature: 0ºC to 50ºC
- Storage Temperature: -10ºC to 70ºC
- Enclosure Code: IP40
- Weight: 110g
- Markings: CE marked, compliant with EN61010-1 and EMC directives
Contact Information
Tempatron Industrial Controls, a division of Eltime Ltd., is located at Eltime House, Hall Road, Maldon, Essex, CM9 4NF UK. For inquiries, contact via email at [email protected] or visit www.tempatron.co.uk.
Catalog excerpts
Output Conversion Modules Product Features ■ Converts an SSR control signal ■ On/Off relay output The T empatron output conversion modules are designed to be connected to the SSR output from a digital temperature or process controller. The CONV0/10A0 module converts the 10Vdc PWM (pulse width modulated) signal into an analogue 4-20mA or 0-10Vdc output whilst the CONVONOFF0 module converts the 10Vdc PWM signal into an on/off relay output. These conversion modules are housed in a compact DIN rail mounting enclosure and are powered from 24Vac. For conversion of SSR control signal to a on/off relay or analogue output 10.0^ N 50.0
Open the catalog to page 1
Tempatron Email: [email protected] Web: www.tempatron.co.uk Continued... to 0-10V or 4-20mA output CONVONOFF0 10Vdc on/off signal to on/off relay output Specification Power Supply Voltage: - Pulse: minimum 8ms, maximum 200ms - Response time 1.2 seconds - Single pole changeover contact - CE marked (meets EN61010-1 low voltage and EN50081-1/50082-1 EMC directives) Specification subject to change without notice. Tempatron: Eltime House, Hall Road, Maldon, Essex, CM9 4NF UK. Tempatron Industrial Controls is a division of Eltime Ltd. © Eltime Ltd. Tempatron Output Converter Modules 04/2011
Open the catalog to page 2All Tempatron catalogs and technical brochures
Isolex8 Liquid Level Sensors2 Pages
Selex Liquid Level Sensors2 Pages
Temperature Probes2 Pages
TR4800 Tachometer Relays2 Pages
FSRST Shaft Rotation Sensors2 Pages
Magnetic Proximity Switches2 Pages
UDT Universal Digital Timers2 Pages
Proxwitch Capacitive Sensors2 Pages
Solid State Relays2 Pages
F-Series Timers2 Pages
Electromechanical Cam Timers2 Pages
Product Catalogue124 Pages
Tempatron Catalogue8 Pages
FLDT Liquid Level Detectors2 Pages
SelexTM Liquid Level Sensors2 Pages
- Temperature probe
- Transformer
- Dry transformer
- Resistance temperature sensor
- Proximity switch
- Level limit switch
- Liquid level detector
- Level probe
- Liquid level sensor
- Switching relay
- Waterproof temperature sensor
- Pt100 temperature transducer
- Temperature controller
- Signal amplifying integrated circuit
- Humidity and temperature probe
- Encapsulated transformer
- Stainless steel temperature transducer
- DC proximity sensor
- Time relay
- Pt1000 temperature transducer