Models Available MINIFLOW2-MCU-D NPN/PNP Input Flowmeter Driver (DIN Rail) MINIFLOW2-MCU-D-M Magnetic Input Flowmeter Driver (DIN Rail) MINIFLOW2-MCU-P NPN/PNP Input Flowmeter Driver (PCB) Product Features DIN rail mounting PCB model ideal for OEM applications Flow range 0 to 1999 pulses per sec. Scaling/dispensing 0 to 99999 pulses 16 Amp changeover relay output 12 to 24Vdc powered LOCKPOTTM operation feature LED to indicate flow or alarm status Automatic dispensing control feature Dual optocoupler output upon request The Tempatron MINIFLOW2-MCUTM flowmeter drivers are multifunction turbine flowmeter interface units providing monitoring, scaling, alarm and dispensing control connection to OEM electronic controllers, computers, PLCs or directly to liquid control valves. They combine analogue potentiometer setting simplicity with microprocessor based, digital timing software. Flow ranges between 0 and 1999 pulses per second can be programmed using the MYTIMETM programming feature. The DIN rail mounting model is ideal for one off control panel applications whilst the chassis mounting pcb model is ideal for medium volume OEM applications, measuring only 70mm x 45mm. Both models are 12-24Vdc powered and have a 16 Amp changeover relay output which is isolated from the supply voltage, an optocoupler output and an LED to indicate current flow or alarm status. For monitoring, scaling, alarm and dispensing control on a turbine flowmeter Dimensions - PCB version The unit is set for onboard LED indication. To select remote LED indication, ‘spin cut’ the copper pad adjacent to the LED to disconnect the onboard LED. Connect the remote LED to the 2-pin LED Molex header (ensuring LED cathode is connected to pin K). Select either PNP or NPN input 17.0 OPTO COUPLER OUTPUT EM OPTOCOUPLER OUTPUT Links T2 & T3 Link T2 and T3 for status LED to display flow status (factory set) Link T3 only for status LED to display alarm status Link T2 only for status LED to display scaling status Remove both T2 and T3 links for status LED to display SMARTSERVETM control statu

Email: [email protected] Ordering information Model Code Description MINIFLOW2-MCU-D NPN or PNP Sensor Flowmeter Driver MINIFLOW2-MCU-D-M Magnetic Pickup Sensor Flowmeter Driver MINIFLOW2-MCU-P NPN or PNP Sensor Flowmeter Driver PCB Output Options Relay as alarm and optocoupler as scaling/dispensing outputs (factory set) or Optocoupler as alarm and relay as scaling/dispensing outputs Flow Alarm Modes Low Alarm Output active when flow less than set flow (factory set) Inband Alarm Output active when flow within set flow band (programmable) Outband Alarm Output active when flow not within set...