Magnetic Pickup Amplifier Module The Tempatron MAGAMP2-M is a miniature fully encapsulated magnetic Models Available MAGAMP2-M Magnetic Pickup Amplifier Module pickup interface module. It converts the low level sinusoidal output from a flowmeter or speed sensor magnetic pickup into a square wave output Product Features Converts magnetic sensor inputs Square wave output Ideal for connection to PLC’s or PC’s Solid state technology Small enclosure protected to IP65 LED indication for input signal 6.5 to 28Vdc powered suitable for direct connection to a PLC, process computer or batch controller system. The modules are sealed to IP65, making them ideal for operation in harsh environments. They are powered from 6.5 to 28Vdc and have an LED to indicate the input signal status. For amplifying flowmeter/speed sensor signals for connection to a PLC or PC Dimensions YELLOW LED input indicator RED 12-24Vdc PINK BLACK Output 0V PLC 5V 12V LOGIC LOGIC Source Input Controller Inpu

Email: [email protected] Ordering informationModel Code Description MAGAMP2-M Magnetic Pickup Amplifier Module Example MAGAMP2-M Specification Power Supply Voltage: - 6.5 to 28Vdc - Differential, 2kohm input impedance - Frequency compensated - Open drain MOSFET (NPN collector like) - 150mm PTFE insulated wires - Output (pink) - Differential input (yellow) - Differential input (yellow) Enclosure: - Crastin® PBT SK643 enclosure material - Red LED indicates signal present Specification subject to change without notice. Tempatron: Eltime House, Hall Road, Maldon, Essex, CM9 4NF UK. Tempatron...