FLDT Liquid Level Detectors Models Available FLDT Liquid Level Detector The Tempatron FLDT liquid level detector is designed for differential or Product Features Differential or single point sensing Adjustable sensitivity Supply voltage 110Vac or 230Vac Standard DIN48 square size Plug-in socket or panel mounting Matching timers available Matching temp. controllers available Plug-in sockets also available the liquid level falls below the ‘low’ level and de-energise when it rises single point detection of liquid levels. The output relay will energise when above the ‘high’ level. Alternatively, by shorting the high and low probes the detector can be used for single point detection. The adjustable sensitivity control enables use in a wide range of conductive liquids. The liquid level detector is housed in a compact DIN48 square enclosure which can either panel mount or surface/DIN rail mount to a socket and it is auxiliary powered from either 110Vac or 230Vac. The 5 Amp rated single pole changeover relay output contact is isolated from the supply voltage and the FLDT has two LEDs to indicate both power and relay status. For differential or single point detecting of liquid levels Dimensions Panel cutout 45mm square (-0.0/+0.5)

Email: [email protected] Ordering informationModel Code Description FLDT Liquid Level Detector Auxiliary Power Code Description 110/230VAC 110Vac and 230Vac Plug-in Bases Code Description C1004 Panel Fixing Clamps CDSR11 11 Pin Rear Screw Panel Socket AZ611 11 Pin DIN Rail/Panel Mount Socket S11P 11 Pin DIN Rail/Panel Mount Socket Example FLDT-110/230VAC Specification Power Supply Voltage: - 110Vac and 230Vac (±15%) - Single pole changeover contact - CE marked (meets EN61010-1 low voltage and EN50081-1/50082-1 EMC directives) Tempatron: Eltime House, Hall Road, Maldon, Essex, CM9 4NF UK....