1. Catalogs
  2. Temas Engineering
  3. 31 01 001 - FABRIC over FOAM GASKETS

31 01 001 - FABRIC over FOAM GASKETS

31 01 001 - FABRIC over FOAM GASKETS

Product catalog summary
Technical Features:
  • Product: Fabric over Foam Gaskets
  • Compliance: UL94 V0 (UL file n° E217116), RoHS, REACH
  • Material:
    • Core: Polyurethane foam open cell (PU) with a density of 90-100 Kg/m³
    • Cladding: Nickel Copper plated Polyester Ripstop (NC) and Nickel Copper plated Polyester Ripstop Carbon Coated (SI)
  • Surface Resistivity: Nickel Copper < 0.1 Ohm
  • Shielding Effectiveness: In accordance with MIL-G-83528, tested on a 10.5 x 10.5 mm standard profile with 50% compression
  • Abrasion Resistance: No change in surface resistivity after 1,000,000 cycles
  • Service Temperature: -30 °C to 75 °C
  • Available Sections: Rectangular, D-shape, Angle-fold, Knife-edge, Round, J-profile, Custom
  • Pressure Sensitive Tape: Modified acrylic with standardized tape width for optimal adhesive area and conductivity
  • Tolerances:
    • < 1.5 mm: ± 0.3 mm
    • 1.5 to 5.0 mm: ± 0.5 mm
    • > 5.0 mm: ± 0.8 mm
  • Additional Information: Other core materials available upon request
Graph Summary: The graph illustrates the shielding effectiveness (SE) in decibels (dB) across a frequency range from 10 MHz to 100,000 MHz for Nickel Copper fabric.
Contact Information: TEMAS ENGINEERING S.R.L., Via Milano 72, 22070 Bregnano(CO), ITALY, www.temas.it
See more

Catalog excerpts

31 01 001 - FABRIC over FOAM GASKETS-1

DATA SHEET n° 31 01 001 Revision : 05 Technical features : Product FABRIC over FOAM GASKETS UL94 V0 gasket (UL file n° E217116) Conform to RoHS, REACH Material core Polyurethane foam open cell (PU) * density 90-100 Kg/m³ Nickel Copper plated Polyester Ripstop (NC) Nickel Copper plated Polyester Ripstop Carbon Coated (SI) Surface Resistivity Nickel Copper Shielding Effectiveness Shielding performance in according to MIL-G-83528 Tested on 10,5 x 10,5 mm standard profile. Gasket compressed 50 % Nickel copper fabric NICKEL COPPER Abrasion Resistance No change in surface resistivity: Service temperature Rectangular ; D-shape ; Angle-fold ; Knife-edge Round ; J-profile ; Custom Pressure Sensitive Tape Modified acrylic. Tape width is standardized for each gasket to achieve the best combination of adhesive area and conductivity Nickel copper * other core materials available upon request TEMAS ENGINEERING S.R.L. - Via Milano 72 - 22070 Bregnano(CO) - ITALY - www.tem

 Open the catalog to page 1

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.