Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

HARDWARE FRONT VIEW Power socket Ethernet port BACK VIEW Mobile network type LEDs Reset button Mobile antenna connector Mobile signal strength indication LEDs POWER SOCKET PINOUT Power / Red wire I/O / Green wire Ground / Black wire I/O / White wire Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

FEATURES MOBILE Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID. SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, Call utilities Supports sending and reading Unstructured Supplementary Service Data messages Black/White list Operator black/white list Band management Band lock, Used band status display Direct connection (bridge) between mobile ISP and device...

MODBUS TCP SLAVE ID filtering Allow remote access Allow access through WAN Custom registers MODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality MODBUS TCP MASTER Supported functions Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII MQTT GATEWAY Gateway Allows sending commands and receiving data from MODBUS Master trough MQTT broker DATA TO SERVER Protocol HTTP(S), MQTT, Azure MQTT, Kinesis...

2 x Configurable Inputs/Outputs. Digital input 0 - 6 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA (not available in TRB140*2****) Output control HTTP POST/GET, Schedule Allows to set certain I/O conditions to initiate event POWER Connector 4 pin industrial DC power socket Input voltage range 9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10us max Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards Power consumption...

HARDWARE INSTALLATION 1. Unscrew two back panel hex bolts and remove the back panel. 2. Insert your SIM card into the SIM socket. 3. Attach the panel and tighten the hex bolts. 4. Attach the mobile antenna (max torque 0.4 N·m / 3.5 lbf·in) and connect the USB cable. LOGIN TO DEVICE 1. Power on the device and connect the USB cable to your computer. 2. Allow the gateway to boot up. This might take up to 30 seconds. 3. Your computer's OS should detect the USB device and install the driver. 4. To enter the gateway's Web interface (WebUI), type http://192.168.2.1 into the URL field of your Internet...

WHAT'S IN THE BOX? STANDARD PACKAGE CONTAINS* • TRB140 • 4.5 W PSU • 1 x LTE antenna (magnetic mount, SMA male, 3 m cable) • Micro-USB cable (0.8 m) • 1 x hex key • LAN cable • QSG (Quick Start Guide) • RMS Flyer • Packaging box 1 X LTE ANTENNA (MAGNETIC MOUNT, SMA MALE, 3 M CABLE) * For all standard order codes standard package contents are the same, execpt for PSU. Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS withou

STANDARD ORDER CODES PRODUCT CODE PACKAGE CONTAINS Standard Package For more information on all available packaging options – please contact us directly. AVAILABLE VERSIONS PRODUCT CODE REGION (OPERATOR) Europe, the Middle East, Africa, Korea, Thailand, India, Malaysia South America, Australia, New Zealand, Taiwan, Malaysia The price and lead-times for region (operator) specific versions may vary. For more information please contact us. * - Versions for other regions are under development. Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to...

MOUNTING OPTIONS DIN RAIL KIT Parameter Mounting standard Screws included Philips Pan Head screw #6-32×3/16, 2pcs RoHS Compliant DIN RAIL KIT DIN Rail adapter Philips Pan Head screw #6-32×3/16, 2pcs for RUT2xx/RUT9xx ORDER CODE For more information on all available packaging options – please contact us directly. COMPACT DIN RAIL KIT Parameter Mounting standard Screws included Philips Pan Head screw #6-32×3/16, 2pcs RoHS Compliant DIN RAIL KIT Compact plastic DIN Rail adapter (70x25x14,5mm) Philips Pan Head screw #6-32×3/16, 2pcs ORDER CODE ORDER CODE For more information on all available packaging...

TRB140 SPATIAL MEASUREMENTS & WEIGHT MAIN MEASUREMENTS W x H x D dimensions for TRB140 Device housing*: *Housing measurements are presented without antenna connectors and screws; for measurements of other device elements look to the sections below. TOP VIEW The figure below depicts the measurements of TRB140 and its components as seen from the top: RIGHT VIEW The figure below depicts the measurements of TRB140 and its components as seen from the right side: Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without...

FRONT VIEW The figure below depicts the measurements of TRB140 and its components as seen from the front: REAR VIEW The figure below depicts the measurements of TRB140 and its components as seen from the back: Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

MOUNTING SPACE REQUIREMENTS The figure below depicts an approximation of the device's dimensions when cables and antennas are attached: Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.