Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

HARDWARE FRONT VIEW Power socket Reset button BACK VIEW Grounding screw POWER SOCKET PINOUT Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover 3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover NETWORK Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP) Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SNMP, MQTT, Wake on LAN (WOL), DLNA VoIP passthrough support H.323 and SIP-alg protocol NAT helpers,...

MODBUS TCP MASTER Supported functions Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII MQTT GATEWAY Gateway Allows sending commands and receiving data from Modbus Master trough MQTT broker DATA TO SERVER Protocols HTTP(S), MQTT, Azure MQTT, Kinesis HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log Firmware update from server, automatic notification OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech,...

POWER Connector 4 pin industrial DC power socket Input voltage range 9 - 50 VDC, reverse polarity protection, voltage surge/transient protection Passive PoE. Possibility to power up through LAN port, not compatible with IEEE 802.3af, 802.3at and 802.3bt standards Power consumption PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS) Ethernet 1 x Digital Input, 1 x Digital Output on 4 pin power connector Status LEDs 8 x LAN status LEDs, 1 x Power LED 1 x USB A port for external devices Reboot/User default reset/Factory reset button PHYSICAL SPECIFICATION Casing material Aluminium housing with DIN tail mounting...

HARDWARE INSTALLATION 1. Connect the power adapter to the socket on the front of the device. Then plug the other end of the power adapter into a power outlet. 2. Connect to the device via an Ethernet cable connected to LAN port. LOGIN TO DEVICE 1. To enter the router's Web interface (WebUI), type http://192.168.1.1 into the URL field of your Internet browser. 2. Use login information shown in image A when prompted for authentication. 3. After you log in, you will be prompted to change your password for security reasons. The new password must contain at least 8 characters, including at least one...

WHAT'S IN THE BOX? STANDARD PACKAGE CONTAINS* • Router RUTX08 • 18 W PSU • Ethernet cable (1.5 m) • QSG (Quick Start Guide) • RMS Flyer • Packaging box * For all standard order codes standard package contents are the same, execpt for PSU. Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prio

STANDARD ORDER CODES PRODUCT CODE PACKAGE CONTAINS Standard package For more information on all available packaging options – please contact us directly. Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

MOUNTING OPTIONS DIN RAIL KIT Parameter Mounting standard Screws included Philips Pan Head screw #6-32×3/16, 2pcs RoHS Compliant DIN RAIL KIT DIN Rail adapter Philips Pan Head screw #6-32×3/16, 2pcs for RUT2xx/RUT9xx ORDER CODE ORDER CODE ORDER CODE For more information on all available packaging options – please contact us directly. COMPACT DIN RAIL KIT Parameter Mounting standard Screws included Philips Pan Head screw #6-32×3/16, 2pcs RoHS Compliant DIN RAIL KIT Compact plastic DIN Rail adapter (70x25x14,5mm) Philips Pan Head screw #6-32×3/16, 2pcs For more information on all available packaging...

RUTX08 SPATIAL MEASUREMENTS & WEIGHT MAIN MEASUREMENTS W x H x D dimensions for RUTX08: Device housing*: *Housing measurements are presented without antenna connectors and screws; for measurements of other device elements look to the sections below. TOP VIEW The figure below depicts the measurements of RUTX08 and its components as seen from the top: RIGHT VIEW The figure below depicts the measurements of RUTX08 and its components as seen from the right side: Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without...

FRONT VIEW The figure below depicts the measurements of RUTX08 and its components as seen from the front panel side: REAR VIEW The figure below depicts the measurements of RUTX08 and its components as seen from the back panel side: Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

MOUNTING SPACE REQUIREMENTS The figure below depicts an approximation of the device's dimensions when cables and antennas are attached: Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

DIN RAIL The scheme below depicts protrusion measurements of an attached DIN Rail: Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.