WFIS Water For Injection Stills
6Pages

Operating principle Technical data MODEL Overall dimmensions Main Utilities The control system is based on a PLC wire operator supervision via a user-friendly touch-screen HMI with the following menu: Control system Here, the pure steam also condenses (resulting in WFI distillate) and it is transferred by pressure to the successive columns. The pure steam produced in the first column is used as the heating medium for the next one, so it condenses and turns into WFI. Simultaneously, the partial amount of nonevaporated water goes to the next column, so it is also partially evaporated as pure steam and used as heating energy for the next column. Feed water (PW) is pre-heated by means of two DTS heat exchangers, which use respectively the heat of the pure steam and distillate water outlet and the plant steam outlet. The first column of the CS water still is equal to our CPS steam generators, heated also with plant steam. Options and accessories • Feed water conductivity monitoring • Pure steam take from the first column • Elevated WFIS condenser • Hot standby mode • Sanitisation/Sterilization of the separator columns and WFIS condensers • Protective mesh guarding • On-line TOC monitoring device • WFI storage and distribution skid. • Mimics of the equipment, showing the operational state in real time • Process parameters (temperature, pressure and conductivity) • Setting up of parameters • Alarm information • Start-up and alarm recognition. Options in paper or electronic chart recorder for pure steam conductivity, temperature, extra feed water conductivity meter, online TOC monitoring, etc. Telstar Av. Font i Sagué, 55 Parc Científic i Tecnològic Orbital 40 08227 Terrassa (Spain) T +34 937 361 600 F +34 937 859 342 Puretech Perrywood Business Park, Salfords Redhill, Surrey (England) RH1 5DZ T +44 (0) 1737 378000 F +44 (0) 1737 378055 www.telstar-lifesciences.com 01 902 1110 I Telstar Puretech reserves the right to improvements and specifications changes without notice. Telstar North America 1504 Grundy’s Lane Bristol, PA 19007 (USA) T +1 215 826 0770 F +1 215 826 0222 Water For Injection Stills

WFIS Water For Injection Stills A choice of quality Telstar Puretech Multiple Effect Water for Injection Stills are designed and constructed to produce pyrogen-free sterile water (WFI) in full compliance with cGMP guidelines as per FDA and EMEA requirements. Engineering and manufacturing practices follow ISO 9001 procedures, ASME BPE criteria, GAMP guidelines, etc. Design and construction meets the most stringent Regulations and Codes from Europe, USA and others concerning safety and pressure vessels. To ensure the equipment meets your requirements, we work in partnership with you and a...

Technical data Operating principle Overall dimmensions Main Utilities Feed water (PW) is pre-heated by means of two DTS heat exchangers, which use respectively the heat of the pure steam and distillate water outlet and the plant steam outlet. The first column of the CS water still is equal to our CPS steam generators, heated also with plant steam. The pure steam produced in the first column is used as the heating medium for the next one, so it condenses and turns into WFI. Simultaneously, the partial amount of nonevaporated water goes to the next column, so it is also partially evaporated...

WFIS Water For Injection Stills A choice of quality Telstar Puretech Multiple Effect Water for Injection Stills are designed and constructed to produce pyrogen-free sterile water (WFI) in full compliance with cGMP guidelines as per FDA and EMEA requirements. Engineering and manufacturing practices follow ISO 9001 procedures, ASME BPE criteria, GAMP guidelines, etc. Design and construction meets the most stringent Regulations and Codes from Europe, USA and others concerning safety and pressure vessels. To ensure the equipment meets your requirements, we work in partnership with you and a...

WFIS Water For Injection Stills A choice of quality Telstar Puretech Multiple Effect Water for Injection Stills are designed and constructed to produce pyrogen-free sterile water (WFI) in full compliance with cGMP guidelines as per FDA and EMEA requirements. Engineering and manufacturing practices follow ISO 9001 procedures, ASME BPE criteria, GAMP guidelines, etc. Design and construction meets the most stringent Regulations and Codes from Europe, USA and others concerning safety and pressure vessels. To ensure the equipment meets your requirements, we work in partnership with you and a...

Technical data Operating principle Overall dimmensions Main Utilities Feed water (PW) is pre-heated by means of two DTS heat exchangers, which use respectively the heat of the pure steam and distillate water outlet and the plant steam outlet. The first column of the CS water still is equal to our CPS steam generators, heated also with plant steam. The pure steam produced in the first column is used as the heating medium for the next one, so it condenses and turns into WFI. Simultaneously, the partial amount of nonevaporated water goes to the next column, so it is also partially evaporated...