LE910Q1

LE910Q1

LE910Q1

Product catalog summary
Overview: The document provides technical specifications and features of various embedded modules and series, primarily focusing on the LE910Q1 module, which is part of Telit Cinterion's xE910 module family. These modules are designed for IoT applications and offer various connectivity options including LTE, UMTS, HSPA, CDMA, and GNSS.
Key Specifications:
  • LE910Q1 Module: An industrial-grade, cost-optimized 3GPP Release 14 LTE Cat 1 bis module, ideal for IoT applications requiring data transmission such as asset tracking and vehicle telematics.
  • Data Rates: Uplink up to 5 Mbps and downlink up to 10 Mbps.
  • Hardware: Dimensions of 28.2 x 28.2 x 2.6 mm, 181-pin LGA interface, 10 I/O ports, USB 2.0 HS, UART, I2C, and 1.8 V SIM interface.
  • Environmental: Operates within an industrial temperature range of -40°C to +85°C and is REACH and RoHS compliant.
  • Power: Output power of Class 3 (0.2 W, 23 dBm) at LTE, with a supply voltage range of 3.4-4.2 V dc.
Approvals and Compliance: The module is approved by FCC/ISED, PTCRB, RED, GCF, RCM, and is compatible with AT&T and Verizon networks.
Product Features:
  • Compliant with LTE FDD Cat 1 bis 3GPP Rel 14.
  • Single LTE antenna for cost savings and reduced device dimensions.
  • Built-in support for various protocols including UDP, TCP, PPP, HTTP, HTTPS, NTP, FTP, and IPv4/IPv6 stack.
  • Control via AT commands according to 3GPP standards and Telit Cinterion custom commands.
  • Wi-Fi scanning capability and embedded GNSS support in specific variants.
Variants:
  • LE910Q1-SN: Marketed for North America, supporting 4G bands B2, B4, B5, B12, B13, B66.
  • LE910Q1-WW: Global variant supporting a wide range of 4G bands.
  • LE910Q1-WWG: Global variant with GNSS support.
  • LE910Q1-SNG: North American variant with GNSS support.
  • LE910Q1-SF: North American variant supporting additional band B14.
Conclusion: The LE910Q1 module is a versatile and efficient solution for IoT applications, offering global deployment capabilities and compliance with major network operators. Its design allows for significant cost savings and adaptability across various regions and applications.
See more

Catalog excerpts

LE910Q1-1

Product Description The LE910Q1 is an industrial-grade, cost-optimized 3GPP Release (Rel) 14 LTE Cat 1 bis module. It is ideal for multiple IoT applications that need data transmission, including: asset tracking, vehicle telematics and remote monitoring. It is also suitable for devices that require global deployment, and even mobility across all continents, including North America. LTE Cat 1 bis is a proven and affordable technology. It is ideal for IoT applications that need higher performance compared to Cat M1 and NBIoT in terms of: • Data rate JUPITER SC872-A • Latency • Mobility Mobile network operators (MNOs) worldwide estimated they will continue to operate and support LTE Cat 1 bis for many years. It is also the best fit for IoT deployments in regions where 3GPP cellular low-power wide-area (LPWA) technologies are not yet activated. Using one antenna brings significant cost savings compared to LTE Cat 1, which requires two antennas. It allows overall device dimension reduction and makes it possible to serve IoT applications with stringent size requirements. The LE910Q1 is a member of Telit Cinterion’s flagship xE910 module family. It delivers 4G radio access technology in the 28.2 x 28.2 x 2.6 mm form factor. The Telit Cinterion xE910 unified form factor family comprises 2G, 3G and 4G products that share a form factor and electrical and programming interfaces. This allows developers to implement a “design once, use anywhere” strategy. AVAILABLE FOR EMEA North America L

 Open the catalog to page 1
LE910Q1-2

Product Features Hardware and Electrical Specifications Data • LTE FDD Cat 1 bis 3GPP Rel 14 compliant • Built-in UDP, TCP, PPP, HTTP, HTTPS NTP, FTP stack • Control via AT commands according to 3GPP • TS 27.005, 27.007 and Telit Cinterion custom AT commands • Wi-Fi scan • Embedded GNSS (GPS, GLONASS, Galileo, Beidou, IRNSS, QZSS) only LE910Q1-WWG/SNG variants • 10 I/O ports (@ 1.8 V), including multifunctional I/Os • Industrial temperature range: - 40° C to +85° C • REACH and RoHS compliant • Output power: • Supply voltage range: QUESTIONS? VISIT WWW.TELIT.COM/CONTACT-US O Like Us on Facebook...

 Open the catalog to page 2

All Telit catalogs and technical brochures

  1. SE250B4

    2  Pages

  2. ELS63

    2  Pages

  3. ELS62 Series

    2  Pages

  4. PLS63 Series

    2  Pages

  5. PLS83 Series

    2  Pages

  6. mPLS63 Series

    2  Pages

  7. mPLS83 Series

    2  Pages

  8. LE910R1

    2  Pages

  9. LE910Cx Linux

    2  Pages

  10. LE910Cx

    2  Pages

  11. LN920A6-NA

    2  Pages

  12. LN920Ax-WW

    2  Pages

  13. LE310Q1

    2  Pages

  14. FN990B34/B40

    2  Pages

  15. FN980/FN980m

    2  Pages

  16. FE910C04

    2  Pages

  17. FN920C04

    2  Pages

  18. SE868K5-RTK

    2  Pages

  19. SL871K2L

    2  Pages

  20. TX62

    2  Pages

  21. FE990B34/40

    2  Pages

  22. SE250B4

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.