Switch - disconnector base mounting 1P - 2P 1NO+1NC  CODE D5LAU01 2NO+2NC  CODE D5LAU02 Ie = 16 A (resistive loads) 4 A (inductive loads) at 250 Vac. xternal handle  included shaft * E Standard shaft included *(e1) L (mm) Door drilling for external handle Technical information CONSULT FOR GROUNDED INSTALLATIONS 160 A Rated insulation voltage (DC) Rated impulse withstand voltage Rated thermal current Ith in ambient at 40 ºC up to 80 ºC Rated short-circuit making capacity *(2) Icm Rated short-time withstand current (1sec) Mechanical features Number of mechanical operations (according to the standards, for other values please consult) For rotated mounting there are S6R references with front plate rotated (supply under request). Standard fixing Short - circuit behaviour *(1) Other voltages and / or utilization categories. Please consult Without limiting protective device (short-circuit maintained 50... 100 ms.) *(2) Terminals location Bottom view Bottom view Bottom view Bottom view Shaft extensions Rated operational current *(1) DC21B Bottom view Bottom view

Switch - disconnector for DC current 1P - 2P xternal handle  included shaft * E Ie = 16 A (resistive loads) 4 A (inductive loads) at 250 Vac. Standard shaft included *(e1) L (mm) Shaft extensions Door drilling for external handle Technical information CONSULT FOR GROUNDED INSTALLATIONS 250 Rated thermal current Rated operational current Rated short-time withstand current (0,05 sec) Icw Conforms to UL98B. Minus -20 to 50ºC. PV disconnect switch. Location Category B Suitable for use in PV Systems in accordance with Article 690 of the NEC Patent USA N.º 9,899,159  B2 Consult according to code Maximum...