*mydirectindustry

Catalogs
Telemecanique Sensors
Osicap Capacitive Sensors

Osicap Capacitive Sensors

Product catalog summary

Overview: This document provides detailed specifications and characteristics of capacitive proximity sensors, both flush and non-flush mountable, with metal and plastic cases. It includes information on sensor types, dimensions, wiring schemes, and environmental resistance.

Specifications:

Sensor Types: Cylindrical, flush mountable with metal cases, and non-flush mountable with plastic cases.
Supply: Available in both d.c. and a.c. supply options.
Sizes: M12, M18, M30, and Ø32 with varying sensing distances.
Output Types: PNP and NPN outputs, with options for NO (Normally Open) and NC (Normally Closed) configurations.

Characteristics:

Nominal Sensing Distance: Ranges from 2 mm to 20 mm depending on the sensor type.
Output State Indication: Yellow LED for status indication.
Switching Capacity: Varies from 200 mA to 330 mA.
Protection: Includes short-circuit protection and reverse polarity protection for certain models.
Environmental Resistance: Conforms to IEC standards for vibration, shock, and electromagnetic interference.

Dimensions and Mounting:

Dimensions: Detailed measurements provided for each sensor type, including pre-cabled and connector versions.
Mounting Accessories: Includes mounting brackets and protection accessories.
Mounting Distances: Minimum distances specified for side-by-side, face-to-face, and facing metal object installations.

Wiring Schemes:

Connector and Pre-cabled Versions: Detailed wiring diagrams for 4-wire and 3-wire configurations.
Adjustment: Sensitivity adjustment using a potentiometer, with specific instructions for each sensor type.

Standards and Certifications:

Conformity: Sensors conform to IEC 60947-5-2 standards.
Protection Degree: IP67 for most sensors, with specific exceptions noted.

Catalog excerpts

Capacitive proximity sensors Cylindrical, flush mountable. Metal case 0 12, threaded M12 x 1, stainless steel Sensing Function 018, threaded M18 x 1, nickel plated brass Sensing Function Output Connection Reference 0 30, threaded M30 x 1.5, nickel plated brass Sensing Function 0 32, plain, nickel plated brass (?) Sensing Function Output Connection Reference (1) Mounting accessory included with sensor. Mounting and protection accessories, fuses and fuse terminal block: see page 31158/2.

Open the catalog to page 1

Capacitive proximity sensors Cylindrical, flush mountable. Metal case (1) These sensors do not incorporate overload or short-circuit protection and therefore, it is essential to connect a "quick-blow" fuse in series with the load (see page (2) With adjustment potentiometer sealing screw.

Open the catalog to page 2

Capacitive proximity sensors Cylindrical, flush mountable. Metal case Mounting accessory (included with sensor XT1 32B1F»L2) (4) Potentiometer beneath sealing screw. (5) Potentiometer beneath protective flap

Open the catalog to page 3

Capacitive proximity sensors Cylindrical, flush mountable. Metal case Wiring schemes Connector version Pre-cabled version YE/GN: Yellow/green Sensitivity adjustment 3 Adjustment using suitable screwdriver (included with sensor). Adjustment from the rearfor XT1 ••••••L2 Minimum mounting distances (mm) Side by side Face to face Facing a metal object Mounted in support

Open the catalog to page 4

Capacitive proximity sensors Cylindrical, non flush mountable. Plastic case Sensing Function Sensing Function Sensing Function Output (1) Mounting accessory included with sensor. Accessories for capacitive sensors XT1* Mounting accessories Descri ption For use with sensor Protection accessories Description For use with sensor Reference Fuses (for unprotected 2-wire sensors) Description Type Sold in Unit reference Cartridge fuses 0.4 A"quick-blow" Fuse terminal block Fuse terminal block for 5 x 20 fuses, grey Unit reference

Open the catalog to page 5

Capacitive proximity sensors Cylindrical, non flush mountable. Plastic case (1) These sensors do not incorporate overload or short-circuit protection and therefore, it is essential to connect a "quick-blow" fuse in series with the load

Open the catalog to page 6

Capacitive proximity sensors Cylindrical, non flush mountable. Plastic case Mounting accessory (included with sensor XT2 32A1F»L2)

Open the catalog to page 7

Dimensions (continued), Capacitive proximity sensors Cylindrical, non flush mountable. Plastic case Wiring schemes Connector version Sensitivity adjustment Adjustment from the side for XT2 18A1 Adjustment from the rearfor XT2 30A1 3 Adjustment using suitable screwdriver (included with sensor) Mounting nut tightening torque: XT2 18:3 N.m (26.5 Ib-in) XT230:8 N.m (70.80 Ib-in)

Open the catalog to page 8

Osicap Capacitive Sensors

Osicap Capacitive Sensors

Catalog excerpts

All Telemecanique Sensors catalogs and technical brochures

Archived catalogs