Lotix TOC Combustion Analyzer
8Pages

Automated High Temperature Combustion TOC Analyzer

The Lotix TOC Combustion analyzer is designed to accurately measure carbon content in aqueous matrices down to the ppb level. It uses proven high temperature combustion, oxidation of carbon material into carbon dioxide, and detection using a new Non-Dispersive Infrared (NDIR) detector. Lotix is the ultimate solution for wastewater, surface water, ground water, sea water, and other hard to oxidize matrices with an economical price to fit any budget.

• No costly syringe drives or 7-port valves! • Ability to run 0-20,000 ppm without dilution with a single 0.5 mL injection volume virtually eliminating the need for multiple calibration curves • Easy to use software requiring < 1 minute to set up a calibration curve • Simple design ensures virtually any component can be accessed in minutes, and with the furnace located in the front, combustion tube maintenance is a snap • Real-time viewing of analytical data and printing of completed sample reports while instrument is running • Easy scheduling of priority samples • Ability to export to CSV...

Accuracy You Can Count On The Lotix TOC Combustion analyzer is designed to accurately measure carbon content in aqueous matrices down to the ppb level. It uses proven high temperature combustion, oxidation of carbon material into carbon dioxide, and detection using a flow-through Non-Dispersive Infrared (NDIR) detector. The Lotix features a vertical quartz combustion tube packed with supported platinum catalyst and quartz beads that receives a continuous flow of air or oxygen at 200 mL/minute. The furnace is normally maintained at 680 °C, but can be varied to any temperature up to 1000 °C....

A. Sample Conveyor – The Lotix conveyor systematically moves sample vials to the sample position for sample introduction via the needle assembly. The conveyor is designed to hold thirty 40 mL VOA vials. B. Needle Elevator Tower - The needle elevator raises and lowers the needle assembly using a pneumatic air cylinder. When lowered, the sample and pressurize needles puncture the septa of the vial. When raised, the needles are safely above the sample vial, allowing the sample conveyor to move the vial in the sample position out for rinse, and the next vial into the sample position. C....

Fully Optimized User Interface The Lotix was developed to simplify TOC analysis. The Lotix’s TOC TekLink™ software, was designed from the user’s perspective. The result is an instrument so fluidly connected to a user’s analytical needs that it becomes nearly transparent. TOC TekLink™ was designed around the following concepts: Schedule Creation Should be Quick and Painless • Calibration and Sample Schedule Screens are logically organized around essential scheduling functions. • Prioritize samples by editing a schedule while running. • Real-time results are shown on both the Calibration and...

Windows® is a registered trademark of Microsoft®.

TELEDYNE TEKMAREverywhereyoulook" www.teledynetekmar.com © 2017 Teledyne Technologies Incorporated 4736 Socialville-Foster Rd. • Mason, Oh 45040 USA Phone: (513) 229-7000 90023_4/17