AQUATek 100 Waters-Only Autosampler

The AQUATek 100 is a Purge and Trap (P&T) Autosampler that automates the sample preparation steps for the analysis of liquid samples via purge and trap. The system is capable of preparing samples such as drinking water and wastewater. With intuitive self-diagnostics and user-friendly software the AQUATek 100 is one of the simplest yet most robust vial robotic autosamplers on the market today. An optional on-board pH module allows for preservation confirmation without ever opening the vial.

How It Works The AQUATek 100 utilizes a fixed volume sample loop that is filled during the vial pressurization step. Internal Standard/ Surrogate is added and the sample is transferred to the concentrator for analysis. The AQUATek 100 then initiates a clean-up cycle to prepare the system for the next sample to be processed. The AQUATek 100 interfaces directly to the Stratum Purge & Trap Concentrator (PTC) or Velocity XPT Concentrator and allows for complete automation of sample preparation for liquid samples including vial movement, sample volume measurement, standard/ surrogate addition, sample...

Options pH Probe - Enables the system to measure and record pH values for all samples in a schedule. Recirculating Cooling Bath - Continuously recirculates cold liquid throughout the chiller tray in order to keep samples cold as required by most EPA Methodologies. Robotic Arm The 2-stage sample needle is positioned by the motion of a two axis robotic arm assembly. This robotic arm moves in & out to position the needle over the sample vials and rinse station, it also moves the needle up & down to allow the needle to puncture the vials. The robotic arm utilizes proven reliable technology where...

Sample Needle A 2-stage sample needle is used to displace sample from the vial to the sample loop. pH Probe The pH probe option allows users to measure and record pH values for all samples in a schedule. Vial Chiller Tray The vial chiller allows for sample cooling. The chiller requires the use of an external recirculating cooling bath (optional accessory) for operation. Sample Loop The AQUATek 100 is equipped with a fixed volume PEEK™ sample loop with volume choices of 5, 10, 20 and 25 mL. The sample loop is filled with liquid sample from the sample vial via a pressurization step. The loop is...

VOC TekLink™ Fully Optimized User Interface Tekmar’s VOC TekLink™ 2G is the next generation in instrumentation software that allows the user to enter all analysis parameters and once activated, it will continuously monitor the system ensuring operating limits are not exceeded. VOC TekLink™ 2G software is capable of performing useful diagnostics such as leak and benchmark tests for instrument validation. All instrument parameters, method scheduling and editing can be programmed. VOC TekLink™ 2G provides pre-developed methods, allowing startup with little or no modifications and also contains an...

Variable Heat Control from 35 °C to 90 °C. Teflon® is a registered trademark of Dupont, Windows® is a registered trademark of Microsoft, PEEK™ is a trademark of Victrex PLC, Siltek® is a registered trademark of Restek. TekLink™ is a registered trademark of Teledyne Tekmar Company. Covered by one or more of the following patents: 7,651,866; 6,280,688 and other patent pending.

System Control TELEDYNE TEKMAREverywhereyoulook" www.teledynetekmar.com