Industrial solid-state relays :selection guide
28Pages

TELEDYNE RELAYS Everywhereyoulook"

SOLID STATE RELAYS The advantages Industrial Solid State Relays (ISSR) compared to Electromechanical Relays (EMR) are well known. ISSRs are fully electronic, with no moving parts inside; no audible noise, able to withstand significant vibration without operational issues, fast response time, but most important of all higher life-time expectancy. Used in optimal operating conditions, ISSRs have nearly unlimited life compared to EMRs, it also does not require any maintenance and prevents production downtime, which is a great advantage when continuous operation is necessary. MAIN APPLICATIONS...

Greater than 40Gbps bandwidth Frequency range, DC to 60GHz Small form factor, 3mm X 3mm X 1mm High isolation Low insertion loss Switching time of less than 100ns RF121 / GRF121 • Broader bandwidth (DC - 18GHz) • Signal integrity up to 40Gbps • SPDT, Magnetic Latching • Metal Enclosure for EMI shielding • High Repeatability • 3 Million Cycle Life MINIATURE MATRIX TELEDYNE CUSTOM SOLUTIONS OTHER TELEDYNE PRODUCTS See Page 17 © 2018 Teledyne Relays

RoHS Compliant • Random and zero-cross models available • Low zero-cross turn-on voltage • Input and output protection and control LED • IP20 touch-proof terminal covers • Heat sinks available Series SH High Industrial Performance (HIPpak) AC Solid-State Relays with Covers Series SH relays offer high performance in a flexible and innovative package. Designed for all types of loads, they provide output to 125A, 690Vac. They incorporate removable touch-proof terminal covers for versatile, easy, and quick connections. SH relays feature a metal baseplate and built-in LED. They are up to 30%...

RoHS Compliant RoHS Compliant SINGLE PHASE AC Series STH High Industrial Performance (HIPpak) AC Solid-State Relays Series STH relays offer high performance in a flexible and innovative • Regulated input current package. Designed for all types of loads, they deliver output to 75A, • Low zero-cross turn-on voltage 600Vac for resistive loads. They have removable touch-proof terminal • Input protection and control LED standard covers for versatile, easy, and quick connections. STH relays feature a • IP20 touch-proof terminal covers optional metal baseplate and are up to 30% lighter than...

Series ST AC Hockey Puck Solid-State Relays Series ST relays are designed for high-power applications. The design incorporates an SCR or triac output. The relays utilize optical isolation to protect the control from load transients. A control LED is available on certain models. All Series ST relays are zero crossing. Internal MOV is also available on ST24D 25A and 50A models. • Tight zero-cross window for low EMI • AC or DC control available • Excellent thermal performance • Internal MOV (certain models) • Control LED (certain models) RoHS Compliant Dimensions LxWxH -02 = Control LED; -16 =...

Series SHP Phase-Control AC Solid-State Relays The Series SHP phase-angle controller provides analog switching. It features an internal microcontroller and overvoltage protection. Choose relays with either removeable input spring connectors or IP20 touch-proof flaps. The relays are designed in conformity with EN60947-4-3 (IEC947-4-3)and EN60950/VDE0805 (Reinforced Insulation). • Microcontroller inside • Analog switcing • Overvoltage protection by varistor • Green LED for input visualization • Short-circuit protection RoHS Compliant Series DH (slimpac) AC Solid State Relays Series DH relays...

Series LS AC Solid-State Relays with Optional Heat Sinks Series LS single-inline package (SIP) relays are designed for mounting • Compact SIP package on printed circuit boards. LS relays facilitate heat sinking by providing • Designed for external heat-sink attachment an metallic interface surface. The relays use a direct-bonded copper • Over-sized thyristor ratings (up to 50A) substrate for thermal efficiency, thermal stress performance and long- • Direct-copper bonding technology life expectancy. Optional heat sinks are available. • Optional heat sinks available -HS1 = With...

WIRING EXAMPLES 2 load control wiring Single phase Two-phase SSR SOB to control heaters connected in star (for balanced low voltage loads without neutral connection) Two-phase SSR SOB to control heaters connected in delta (for high voltage, balanced or unbalanced loads) RoHS Compliant Series SD Dual-Output AC Solid-State Relays Series SD dual-phase relays are designed for all types of loads. The • Designed for all types of loads design incorporates two relays in a single package. The relays utilize • Dual output (two relays in one package) optical isolation to protect the control from load...

Motor reverser SV9 for three-phase asynchronous motor Three-phase SSR SVT8/SGT8 controlling a three-phase motor with a thermal - magnetic protection. Three-phase SSR SCT/SVT/SGT to control heaters connected in star with fuses protection. Three-phase SSR 2 legs three-phase SSR SCT/SVT/SGT to control SGB to control heaters heaters connected in connected in star with delta with circuit-breaker, fuses protection. RoHS Compliant Series E3P Three-Phase AC Solid-State Relays Series E3P three-phase relays are designed for all types of loads. The • Three-phase output design incorporates an oversized...

Series E3PT Three-Phase Touch-Proof AC Solid-State Relays Series E3PT three-phase solid-state relays are designed for all types of loads. The E3PT relays include as a standard a control LED for visual status. The E3PT is touch-proof for user safety. An internal MOV and snubber circuit protect the output thyristor. The E3PT relays are highly immune to large current surges. RoHS Compliant • Designed for all types of loads • Tight zero-cross window for low EMI • Control LED on all models • Internal output transient protection • IP20 touch-proof H = High surge capability RoHS Compliant. For...