ULTRAFLOW 150, ULTRASONIC GAS FLOW AND TEMPERATURE MONITOR
6Pages

TELEDYNE INSTRUMENTS Monitor Labs A Teledyne Technologies Company ULTRASONIC GAS FLOW AND TEMPERATURE MONITOR

Ultraflow 150’s state-of-the-art signal processing and innovative modularity offers customers incomparable performance, accuracy, flexibility and a maintenance-free solution amongst all flow technologies. Innovative, non-contacting technique greatly reduces maintenance The Ultraflow 150 is a patented advance in continuous flow measurement systems for small and large stacks and ducts. Transducers are non-intrusively mounted in Teflon housing and are protected from flue gas and particulate with continuous purge air. This noncontacting method mitigates maintenance and ensures long term...

Transducer Interface Enclosure (TIE) Electrical signals corresponding to acoustic transmit and receive signals are conveyed via cables between the transducers and the TIE. The TIE houses preamp /driver boards that amplify receive signals and transmit pulses. A signal processing board containing an FPGA controls timing, data collection, filtering, boxcar integration and other functions. A microprocessor board evaluates the box car data and determines time of flight, flow velocity, volume, speed of sound, temperature and signal to noise ratio. All these data values may be viewed via the...

Specifications Flow Measurement: Training An Operation and Maintenance Manual is provided with the ULTRAFLOW 150. In addition, periodic hands-on training classes are conducted at the Teledyne Monitor Labs facility. Training classes may also be scheduled at the customer’s site. Range: Resolution: Long-Term Repeatability: Relative Accuracy: (VS. EPA Test Method 2) Response Time: Initial Calibration: Factory calibration based on duct geometry plus flow data. Available for site specific calibration against pitot tube traverses. +/- 1% reading over full range of rated ambient temperature and...

The Ultraflow 150 A state-of-the-art advance in flow and temperature measurement of stacks and ducts Ultra-low drift operation Full system integrity calibration checks Low mounting angle rejects pitch flow effects Non-intrusive, non-contacting technique Flow measurement independent of flue gas composition, pressure and temperature Measurement technique rejects cyclonic flow EPA’s stringent 7.5% RATA requirement and flow-to-load ratio checks established the need for accurate and repeatable flow measurement. Teledyne Monitor Lab’s Ultraflow achieves this consistent accuracy. 40 CFR Part 75...

Teledyne Monitor Labs, Inc. Leading the way in Emissions Monitoring Throughout its history, Teledyne Monitor Labs has developed and patented breakthrough advances in emission monitoring technology. Teledyne Monitor Lab’s drift-free Ultraflow Volumetric Flow Monitor was the first to perform across-the-stack zero span calibration checks. Now, Teledyne Monitor Labs has advanced the technology to include quad-sets of transducers to handle unique application issues eliminating the need for additional platforms and to improve response time for process control applications. The Ultraflow’s modular...