TELEDYNE LECROY ZD Series Active Differential Probes

ZD SERIES ACTIVE DIFFERENTIAL PROBES The ZD Series probes provide wide dynamic range, excellent noise and loading performance and an extensive set of probe tips, leads, and ground accessories to handle a wide range of probing scenarios. The low 1 pF capacitance means this probe is ideal for all frequencies. The ZD Series differential probes provide full system bandwidth for all Teledyne LeCroy Oscilloscopes 1.5 GHz and lower. Fully Integrated With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to...

ZD SERIES ACTIVE DIFFERENTIAL PROBES The Swivel Tip adapter can be adjusted to probe The short spring loaded ground leads can be used test points ranging from 0 to .300" apart with as either a ground accessory or an extension of the Z-Axis compliance. probe inputs. The IC leads with a compensation resistor provide excellent signal fidelity when probing pins of an IC. One side of each blade is insulated to prevent shorting the signal to the

SPECIFICATIONS AND ORDERING INFORMATION Specifications Electrical Characteristics Bandwidth (Warranted) Bandwidth (Typical) Risetime 10–90% (Typical) Risetime 20–80% (Typical) LF Attenuation Accuracy (Warranted) Zero Offset (Typical) (within 15 minutes after autozero) System Noise (Typical) Probe Noise Density (Typical) Input Differential Range (Nominal) Differential Offset Range (Nominal) Offset Gain Accuracy (Typical) Common Mode Range (Nominal) Maximum Non-destruct Voltage (Nominal) CMRR (Typical) DC Input Resistance (Nominal) 1.75 mVrms 38 nV/rt (Hz) ±8 V (16 Vp-p) ±18 V 2% ±10 V 30 V 60...