TELEDYNE TEST TOOLS Everywhereyoulook™ Handheld Oscilloscope Dedicated 6000 Count DMM Data logger 1 Sa/s to 25 kSa/s Multifunctional tool suitable for harsh environments 1000-ISO series offers two independent floating isolated inputs. © Ideal for simultaneous measurement of independently floating signals and to reduce accidental short circuits. © Large bright display makes it easy to view data in the field. Safety rated for industrial environments. Capture more time and show more waveform detail Excellent accuracy regardless of the waveform shape. Debug serial buses directly in your Oscilloscope at no extra cost. • IP51 rated dust and drip-proof housing. © • Long Capture - 6 Mpts/Ch and 12 Mpts interleaved. • True-RMS measurements - All AC Voltage and © Current ranges give True-RMS readings. • Serial Bus Decoders for I2C, SPI, UART, CAN, LIN © • 3 Years Warranty as standard. © Reliable product gives peace of mind.

PRODUCT OVERVIEW The Teledyne Test Tools DSOH1000 and DSOH1000-ISO handheld oscilloscopes integrate oscilloscope, recorder and multimeter functions into a convenient and portable design. Weighing only 1.7 kg (3.8 lb), the battery-powered DSOH series can be used for field testing, automotive, R&D, and industrial maintenance. Oscilloscope inputs Superb Performance • 100 MHz and 200 MHz Bandwidth models • Max Sample rate of 1 GSa/s • Waveform capture rates up to 100,000 wfm/s • Vertical range of 2 mV/div to 100 V/div • Up to 12 Mpts of Acquisition memory • Sequence acquisition mode (up to 80,000...

SPO display technology provides fast refresh rates. The resulting intensity-graded trace is brighter for events that occur with more frequency and dims when the events occur with less frequency. The color temperature display is similar to the intensity-graded trace function, but the trace occurrence is represented by different colors (color "temperature") as opposed to changes in the intensity of one color. Red colors represent events that occur more frequently, while blue is used to mark points that occur less frequently. 2 Record Length of up to 12 Mpts Using hardware-based Zoom technologies...

The T3DSOH series can measure all sampled data points up to 12 Mpts. This ensures the accuracy of measurements while the math co-processor decreases measurement time and increases ease-of-use. Through Gate and Zoom measurement, the user can specify an arbitrary interval of waveform data analysis and statistics. This helps avoid measurement errors that can be caused by invalid or extraneous data, greatly enhancing the measurements’ validity and flexibility. The new math co-processor enables FFT analysis of incoming signals using up to 1 M samples per waveform. This provides high-frequency resolution...

Wall power using the supplied adapter Battery powered T3DSOH supports adapter power supply and battery power supply. After connecting the adapter, the battery enters into charging mode. The adapter provides a maximum 4 A output current. T3DSOH uses a UL2054 certified lithium battery package. The battery capacity of 6900 mAh can guarantee longterm operation without an external power supply for up-to 5.5 hours (T3DSOH1000 series) and 4 hours (T3DSOH1000-ISO series). The battery supports an external charger to further meet the requirements of portability. Right side of the T3DSOH series T3DSOH supports...

1 According to IEC61010-1, a voltage higher than 30 Vrms is a dangerous voltage, necessary protection must be taken to prevent personal injury. Please read the user's manual for details. 2) The T3DSOH series handheld oscilloscope featured 1 MQ input impedance. Bandwidth and pulse response must be verified with an external 50 Q adapter, to guarantee signal integrity at higher frequency.

1) The spec for DMM functions are calibrated and verified in Battery-Power mode, Temperature range [23 °C ± 5 °C], warm-up for 0.5 hour. 2) For rank A (ampere) range, the measurement time should be less than 10s, the interval time should be more than 15 minutes. 3) This spec is for T3DSO1000-ISO only, The maximum input voltage is 600V (DC/AC) for the T3DSO1000 series. 4) ± of reading % ± range error. For AC signals, the input signal should be greater than 10 % of range. 5) 60 mA, 600 mA specification along with adapter SCD600MA; 6 A, 10 A specification along with adapter SCD10A.

1 The spec for DMM functions are calibrated and verified in Battery-Power mode, Temperature range [23 °C ± 5 °C], warm-up for 0.5 hour. 2) For rank A (ampere) range, the measurement time should be less than 10s, the interval time should be more than 15 minutes. 3) This spec is for T3DSO1000-ISO only, The maximum input voltage is 600V (DC/AC) for the T3DSO1000 series. 4) ± of reading % ± range error. For AC signals, the input signal should be greater than 10 % of range. 5) 60 mA, 600 mA specification along with adapter SCD600MA; 6 A, 10 A specification along with adapter SCD10A.

Warranty: 3 Years return to Teledyne LeCroy.

TELEDYNE TEST TOOLSEverywhereyoulook" Company Profile Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively. Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to...