TELEDYNE TEST TOOLS Tools for Improved Debugging • Low profile form factor: 4 Channel Model: 1U High Package 8 Channel Model: 2U High Package • 12-bit ADC combined with low noise front end provides excellent noise performance • Robust Connectivity Built-in web server supports remote control over the LAN port. Supports SCPI Commands over 1000M LAN (VXI-11/Telnet/Socket) and USBTMC interface • Includes Power Analysis and Eye Diagram and Jitter analysis applications as standard • Includes Serial Bus Decoders for I2C, SPI, UART, CAN, LIN, CAN FD, I2S, MIL- STD- 1553B, FlexRay, SENT & Manchester • Math and Measure - 9 basic math functions plus FFT, and 50+ automatic measurement parameters • Optional 16 Channel Logic Probe to enable Mixed Signal functionality © Low-profile, high-density package saves rack space for automated test applications. © Get better insight on the signal being measured with minimal noise interference. © LAN connection provides very fast data acquisition for automated test applications. © Powerful Data analysis applications as standard. © Debug serial buses directly in your Oscilloscope at no extra cost. © Extract results from waveforms and measurements. © Add mixed signal debugging in your Oscilloscope.

T3DSO4000L-HD Low Profile Oscilloscope features 4-channel (1U High) and 8-channel (2U High) models with analog bandwidth option from 500 MHz to 2 GHz. The low profile form factor combined with 12-bit high resolution ADCs and low noise front end provides an impressive noise performance to cover a wide range of measurement applications. Each model offers a maximum sample rate of 10 GSa/s per channel and a maximum memory depth of 500 Mpts. It can be remotely controlled over LAN with its built-in web server and a complete SCPI command set over the standard 1000M LAN connection. An impressive display...

PANEL INTRODUCTION   nalog Input Connectors 1 MΩ: ≤ 400 Vpk (DC + AC), A DC~10 kHz; 50 Ω: ≤ 5 Vrms, ±10 V Peak  Probe Compensation / Ground Terminal  Power Standby Button  Digital Input Connector  Acquisition status and LAN status LEDs   SB 3.0 Host Ports Connect to USB storage devices U for data transfer or USB mouse / keyboard for control   C Power Input and Power Switch A   DMI Video Output Connect the port to an external H monitor. The resolution is 1280 * 800   000M LAN Port Connect the port to the network 1 for remote control   SB 2.0 Hosts Connect with a USB storage device U or USB mouse/keyboard...

Key Features • 8/4 analog channels + 1 external trigger. • Analog channel bandwidth: up to 2 Ghz; real-time sampling rate of up to 10 GSa/s • Vertical resolution: 12-bits • Low noise floor: 153 |jVrms at full bandwidth of 2 GHz • New generation of high speed display technology > Waveform capture rates up to 170,000 wfm/s (normal mode), and 750,000 wfm/s (sequence mode) > Supports 256-level intensity grading and color temperature display modes > Memory depth up to 500 Mpts/channel > Digital trigger system • Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Qualified,...

FUNCTIONS AND CHARACTERISTICS High-resolution to meet high precision test requirements When compared to waveforms acquired and displayed using conventional 8-bit oscilloscopes, waveforms captured with 12-bit technology are cleaner and provides more signal detail. This is helpful for wide dynamic range signals in which a full-scale signal must be acquired while at the same time very small amplitude signal details must be analyzed. High Performance front-end Superb DC Gain Accuracy The noise floor value is: ● 153 μVrms at full bandwidth of 2 GHz ● 125 μVrms at bandwidth of 1 GHz A typical DC Gain...

FUNCTIONS AND CHARACTERISTICS Multiple Trigger Functions History Mode Edge, Slope, Pulse, Video, Windows, Runt, Interval, D ropout, Pattern, Qualified, Nth edge, Setup/ hold, Delay, and serial trigger. The history function can record up to 80,000 frames of waveforms. The recording is executed automatically so that the customer can playback the history waveforms at any time to observe unusual events and quickly ocate l the area of interest using cursors or measurements. The ailed frames of the Mask Test can be stored as f h istory frames. Advanced Math Function Trigger Zone In addition to the...

The oscilloscope can search events specified by the user in a frame. Events flagged by the Search can be recalled automatically using Navigate. It can also navigate by time (delay position) and history frames. Parameter Statistics Function Statistics show the current value, maximum value, minimum value, standard deviation, and mean value of up to 12 parameters simultaneously. A histogram is available to show the probability distribution of a parameter. Trend and Track are available to show the parameter value vs. time. Hardware-based Mask Test Function The oscilloscope utilizes a hardware-based...

FUNCTION & CHARACTERISTICS Eye /Jitter Analysis Power Analysis The Power Analysis application provides a full suite of p ower measurement and analysis tools. These tools enable an improvement in the efficiency of measurements made on switching power supplies and power devices. The Power Analysis application can measure Power Q uality, Current Harmonics, Inrush Current, Switching Loss, Slew Rate, Modulation, Output Ripple, Turn On/ Turn Off, Transient Response, PSRR and Efficiency. Each measurement has a help screen showing a connection diagram with notes. Supports eye diagram and jitter analysis/measurement....

Specifications are not guaranteed unless the following conditions are met: • The oscilloscope calibration period is current • The oscilloscope has been working continuously for at least 30 minutes at the specified temperature (18°C - 28 °C) Acquire (analog) Sample rate10 GSa/s with ESR1 per channel Memory depth 2) 3) 500 Mpts/ch (single-channel) ]) The bandwidth is 1 GHz below 2.3 mV/div 2) Take the standard deviation (Stdev)