T3DMM4-5 Data Sheet 4.5 Digit Digital Multimeter Broad Measurement Range DC: 1000 Volts AC: 750 Volts Current: 10A Tools for Improved Debugging ● Wide range of measurements – DC/AC voltage and Current, Resistance, Capacitance, Frequency, Period, Temperature, and more. More application coverage from a single Digital multimeter. True-RMS measurements – All AC Voltage and Current ranges give True-RMS readings. Excellent accuracy regardless of the waveform shape. Advanced measurement features – Min, Max, Average, Standard Deviation dBm/dB, Pass/fail, Histogram, Trend, Relative measurements. Advanced features for today’s measurement needs. Built-in cold terminal thermocouple compensation – 4.3 inch (10.92 cm) color TFT-LCD 480 x 272 display. Accurate Temperature measurements. USB Device, USB Host and LAN support Remote control your measurements. Remote Control

PRODUCT OVERVIEW Teledyne Test Tools T3DMM4-5 is a 4½ digit digital multimeter incorporating the latest 4.3 inch (10.92cm) dualdisplay technology which can be configured to show data histograms, Data fluctuation Trends, Bar Graph, Statistics or the traditional Number mode, all in an easy to use interface. A great feature of the Teledyne Test Tools T3DMM4-5 is it’s ability to made highly accurate True RMS AC Voltage and Current measurements, meaning no loss of accuracy even when measuring complex voltage and current waveforms. The T3DMM4-5 is especially well suited for the needs of the general...

SPECIAL FEATURES Dual Display Trend Chart Hold Measurement

SPECIFICATIONS DC Characteristic Function Diode Test6) Continuity Test Test current or Load voltage Remarks: 1) Specifications are after 0.5 Hour warm-up, “Slow” measurement rate and calibration temperature 18°C ~ 28°C. 2) 10 %over range on all ranges except for DCV 1000 V, ACV 750 V, DCI 10 A and ACI 10 A. 3) Specifications are for 4-wire measure or 2-wire measure under “REF” operation. ±0.2 Ω of extra errors will be generated if perform 2-wire measure without “REF” operation. 4) Plus 0.02 mV of error per 1 V after the first ±500 VDC. 5) 30 seconds OFF after 30 seconds ON is recommend for continuous...

SPECIFICATIONS AC Characteristic Function Frequency Range Additional wave crest factor error (not Sine)7) Wave crest coefficient 1 – 2 2 – 3 Remarks: 1) Specifications are for 0.5 Hour warm-up, “Slow” measurement rate and calibration temperature 18°C ~ 28°C. 2) 10 %over range on all ranges except for DCV 1000 V, ACV 750 V, DCI 10 A and ACI 10 A. 3) Specifications are for amplitude of sine wave input > 5 %of range. For inputs from 1%to 5 %of range and <50 kHz, add 0.1%of range as extra error. For 50 kHz to 100 kHz, add 0.1%of range as extra error. 4) Plus 0.025 V of error per 1 V after the first...

SPECIFICATIONS Frequency and Period Characteristic Function Frequency Range Remarks: 1) Specifications are for 0.5 Hour warm-up. 2) Except for exceptional levels, the AC input voltage is 5 %to 110 %of range when <100 kHz and 10 %to 110 %of range when >100 kHz. 750 V range is limited to 750 Vrms. The accuracy is 10 times %of Reading when the measurement range of AC voltage is in 600 mV range. Capacitance Characteristic Remarks: 1) Specifications are for 0.5 Hour warm-up and “REF” operation. Using of non-film capacitor may generate additional errors. 2) Specifications are for from 1%to 110 %on...

MEASURING METHOD AND OTHER CHARACTERISTICS DC Voltage Input Resistance Input Bias Current Input Protection CMRR NMRR 600 mV 10 MΩ or 10 GΩ selectable 6 V, 60 V, 600 V and 1000 V Range 10 MΩ ± 2 % < 90 pA, 25°C 1000 V on all ranges 120 dB (For the 1 KΩ unbalanced resistance in LO lead, max ± 500 VDC) 60 dB at “slow” measurement rate Resistance Testing Method Input Protection 4-wire resistance or 2-wire resistance selectable 1000 V on all ranges DC Current Shunt Resistor Input Protection 600 μA sampling voltage < 33 mV 6 mA sampling voltage < 0.33 V 1 Ω for 60 mA, 1 Ω for 600 mA 0.01 Ω for 6 A,...

MEASURING METHOD AND OTHER CHARACTERISTICS Temperature Measuring Measurement Method Support for TC and RTD types of sensor Trigger and Memory Samples/Trigger Trigger Delay External Trigger Input 1 ~ 10000 6 ms ~ 10000 ms optional Input Level Trigger Condition Input Impedance Level Output Polarity Output Impedance TTL compatible (High level when left input terminal is Disconnected Rising and Falling selectable ≥ 20 KΩ//400 pF, DC-coupled TTL compatible Straight and negative optional 200 Ω, typical History Records Volatile Memory Nonvolatile Memory 10 K reading of history records 1 Gb Nand Flash,...

Ordering information Product Name Model Standard Accessories Teledyne Test Tools T3DMM4-5 Digital Multimeter T3DMM4-5 Two Test Leads, Two Alligator Clips A USB Cable A Quick Start A Guarantee Card Power Cord The T3DMM4-5 comes with a 3 year return to Teledyne LeCroy warranty.

ABOUT TELEDYNE TEST TOOLS Company Profile Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively. Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic...