Catalogs >
Teledyne LeCroy Europe >
SDA 7 Zi-A Serial Data Analyzers

SDA 7 Zi-A Serial Data Analyzers
1 / 28Pages

Catalog excerpts

TELEDYNE LECROY

The new Oscilloscope experience is here 7 The Only Complete Debug Solution Up to 6 GHz Combining excellent signal fidelity with an architecture that maximizes speed in every performance aspect, the new WavePro 7 Zi-A Series presents a totally new oscilloscope experience from 1.5 to 6 GHz bandwidths. Experience 50 Ω and 1 MΩ inputs for every channel and four inputs into high-speed front end amplifiers and analog to digital converters. WavePro 7 Zi-A is standard with an Intel® Core™ i7-2600 Quad-core, 2.6 GHz (per core, up to 3.8 GHz in Turbo mode) CPU with 8 GB of RAM (upgradeable to 32 GB)....

Open the catalog to page 2

1. X-Stream II streaming architecture — 10–100 times faster than other oscilloscopes 2. eepest toolbox with more measurements, D more math, more power 3. Intel® Core™ i7-2600 Quad-core, 2.6 GHz (per core, up to 3.8 GHz in Turbo mode) CPU with 4. xceptional instrument responsiveness, even E at maximum acquisition memory (256 Mpts) 5. 25 MB/s data transfer rate from oscilloscope 3 to PC with Teledyne LeCroy Serial Interface Bus (LSIB) option 6. 5.3” widescreen (16x9) high resolution 1 WXGA color touch screen display 7. rotect your investment with bandwidth upgrades P 8. erial...

Open the catalog to page 3

Most complete Debug solution from 1.5–6 GHz Freedom from Limitations panel or by remote control. The result—it’s easy to hook up a offers general purpose utility never passive probe even on 4 or 6 GHz WavePro’s fast and responsive before seen in oscilloscopes from models—no more frustration and front panel and touch screen user hassle of trying to find a 1 MΩ input interface are well integrated so you oscilloscopes contain selectable adapter. Plus, any existing investment can easily choose and setup your in Teledyne LeCroy probes, such as vertical, horizontal trigger and mea- The 4 and 6...

Open the catalog to page 4

Quick Insight for Debug Insight is the power or act of seeing into a situation. Start up problems on a new design require a combination of problem recognition, precise triggering for fast isolation of rare events, and comparison tools that help correlate timing of problems. The ability to capture megapoints of waveform information and intuitively analyze it to find anomalies shortens the time to debug. WavePro’s TriggerScan, WaveScan and deep measurement toolbox maximize quick insight. Single-ended active probes, current probes, high-voltage, mixed signals, and high frequency differential...

Open the catalog to page 5

Most complete Debug solution from 1.5–6 GHz Complete System Debug Search and Scan to Understand Search a captured waveform for hundreds of different measurement parameters or other conditions using WaveScan. Set complex conditions, view search results on the waveform and in a table, and quickly zoom and jump to an entry. “Scan” for events that can’t be triggered in hardware. between different signals is vital to fast debug. Only WavePro 7 Zi-A combines the best of general purpose oscilloscopes (low-speed serial triggers and decoders, mixed signal capability, high impedance probing) to allow...

Open the catalog to page 6

X-Stream II Fast Analysis and Responsiveness Deep Insight for Analysis Applying the WavePro 7 Zi-A Series’ flexible and deep measurement and analysis toolbox to characterize and validate a design creates understanding. That is Deep Insight. An oscilloscope’s operating performance comes from the design that integrates the operating system, the hardware processor specification and the waveform processing method. Each component is important to the overall architecture performance but only the X-Stream II waveform processing method unleashes amazing speed performance and no compromise in...

Open the catalog to page 7

Teledyne LeCroy — The Analysis Memory Leader Teledyne LeCroy has found a way to make long acquisition memory seamless and pain free to use. The WavePro 7 Zi-A Series’ proprietary X-Stream II architecture supports capturing, zooming, measuring and analyzing multiple waveforms at up to 256 Mpts deep. WavePro 7 Zi-A’s proprietary architecture design is augmented with an Intel® Core™ 2 Quad processor (12 GHz effective WavePro 7 Zi-A excels at performing complex calculations on long waveforms, enabling users to gain waveform insight with confidence. Here, a 40 Mpts PCIe Gen1 waveform acquisition...

Open the catalog to page 8

Deep Insight Clarifies Complex Signals All Oscilloscope Tools are not Created Equal WavePro 7 Zi-A has the deepest standard toolbox of any oscilloscope, providing more measure, math, graphing, statistical, and other tools, and more ways to leverage the tools to get the answer faster. While many other oscilloscopes provide similar looking tools, Teledyne LeCroy allows the most flexibility in applying the tools to any waveform. Customized Tools Only Teledyne LeCroy completely integrates third party programs into X-Stream II fast throughput streaming architecture makes difficult analysis and...

Open the catalog to page 9

PROBES High-performance probes are an essential tool for accurate signal capture. Consequently Teledyne LeCroy offers an extensive range of probes to meet virtually every application need. Optimized for use with Teledyne LeCroy oscilloscopes, these probes set new standards for responsiveness and signal detection. ZS Series High Impedance Active Probes • GHz (ZS1000),1.5 GHz (ZS1500), 1 2.5 GHz (ZS2500) and 4 GHz (ZS4000) bandwidths • High Impedance (0.9 pF, 1 MΩ) • xtensive standard and available E probe tip and ground connection accessories 1.5 GHz bandwidths • ide dynamic range, W low...

Open the catalog to page 10

WaveLink Probes D610/D620 and D410/D420 The D610/D620 and D410/D420 probes boast excellent noise performance that is essential for making precise jitter and other signal integrity measurements. The high DC and midband impedance make them ideal for many serial data and memory applications such as PCI Express, FireWire, and DDR. With ±4 volt offset capability and ±3 volt common mode control, the WaveLink probes are designed for multi-purpose applications for single-ended needs (such as DDR memory) and serial data applications (such as HDMI). The WaveLink Differential Probe Series is a high...

Open the catalog to page 11