Current Probes Accurately Measure AC, DC and Impulse Currents

Measure Currents in a Wide Range of Applications LeCroy current probes do not require the breaking of a circuit make accurate and reliable current measurements. Based on a combi- nation of Hall effect and transformer technology, LeCroy current probes are ideal for making accurate AC, DC, and impulse current measurements. Fully Integrated with Many current probes require external power supplies or amplifiers to display screen. All LeCroy current probes are powered through the LeCroy ProBus® connection and require no additional hardware. Along with providing power, the ProBus connection allows...

CP031 – 30A, 100 MHz Current Probe Features • 100 MHz bandwidth • Small form factor accommodates large conductors with small jaw size • 30 Arms continuous current, 50 A peak current The CP031 is LeCroy’s highest bandwidth current probe. Along with the high 100 MHz bandwidth the CP031can probe continuous currents of 30 A rms and peak currents up to 50 A. The CP031 features a small form factor making it easier to probe on a crowded, compact board. General Characteristics Electrical Characteristics* Cable Length 1.5 m Max. Continuous Input Current 30 A Bandwidth 100 MHz Weight 240 g Max. Peak Current...

CP030 – 30 A, 50 MHz Current Probe Features • Small form factor accommodates large conductors with small jaw size • 30 Arms continuous current, 50 MHz bandwidth • 50 A peak current The CP030 was designed with a small form factor for today’s crowded boards. The small jaw can probe currents in tight spaces and still clamp onto conductors up to 5 mm in diameter. Continuous currents of 30 Arms and peak currents of 50 A can be measured by the CP030, which also features a 50 MHz bandwidth. General Characteristics Electrical Characteristics* Max. Continuous Input Current Bandwidth Max. Peak Current...

Unlock Detection The AP015 current probe can measure continuous current of 30 Arms and peak pulses of up to 50 A for durations up to 10 seconds. This probe also features an overheating protection circuit, which will display an on-screen warning to the user to prevent damage. A probe unlock detection feature is also built in to the AP015 to ensure accurate measurements. Electrical Characteristics Max. Continuous Input Current 30 A Max. Peak Current at Pulse Width 50 A < 10 s Rise time (typical) < 7 ns General Characteristics Cable Length Max. Conductor Size (diameter) Usage Environment Operating...

Electrical Characteristics nput Current Rise time (typical) < 35 ns Minimum Sensitivity 200 mA/div General Characteristics Cable Length Weight (probe only) Size (diameter) Usage Environment Indoors t Requires AP-1M for use with 50 Q input only oscilloscopes Maximum Input Current vs. Frequency Insertion Impedance vs. Frequency continuous current Electrical Characteristics nput Current Rise time (typical) Minimum Sensitivity General Characteristics Cable Length Weight (probe only) Size (diameter) Usage Environment Indoors t Requires AP-1M for use with 50 Q input only oscilloscopes. Maximum Input...

Related Products and Ordering Information Related Products DA1855A – Differential Amplifier The DA1855A high-performance differential amplifier provides 100 MHz bandwidth, industry leading overdrive recovery, and outstanding common mode rejection ratio. The fast overdrive recovery provides the ability to make critical saturation voltage measurements while the high CMRR enables upper gate drive measurements. Built into the DA1855A is a precision voltage generator for offset far greater than the oscilloscope can provide on its own. The DA1855A can be operated in true differential mode or switched...