Teledyne Isco Automation Modules For CombiFlash® EZ Prep Maximize the throughput and flexibility of your CombiFlash EZ Prep by adding automation for longer unattended operation. We offer three different options for automating the CombiFlash EZ Prep purification system. These options can be used independently or in combination with one another to meet your application needs. AutoInjector Module The AutoInjector is designed for the user who needs to make multiple purification runs of the same sample. Simply input the volume of sample you have and the number of injections needed for purification. • Automate multiple injections of the same sample with up to 100 repeat injections totaling up to 1 liter of sample Automatic cleaning procedure eliminates carry-over Utilize the simple single-screen user interface. AutoSampler Module If you have several different samples to purify which may require multiple injections and different chromatographic conditions, the AutoSampler is the right product for you. Build a simple sample table in seconds, press start, and let the system do the rest. RFID identification on sample load and collection racks eliminates errors. • Add new samples to the queue at any time Expand fraction collector capacity with the two additional collection racks on the AutoSampler deck Washes the probe between samples to eliminate carry-over Make your priority sample r

Column Selector Module Define up to four columns and their respective position in the EZ Prep's configuration screen for fast set up. When you select the column needed for your purification, Isco's PeakTrak® switches the column selector valve to the correct position. Use all four positions for different columns or dedicate a position to bypass for system flush. • The Column Selector has positions for up to four preparative columns with diameters from 10 - 50 mm and lengths up to 250 mm • Reduce leaks from manual column changes • Use alone or in conjunction with the AutoInjector or the AutoSampler •...