1. Catalogs
  2. Teledyne Isco
  3. 676 Rainfall Logging System

676 Rainfall Logging System

676 Rainfall Logging System

676 Rainfall Logging System

Product catalog summary
Overview: The Isco 676 Rainfall Logging System is designed for precise rainfall measurement using a tipping bucket rain gauge with sapphire bearings. It features an 8-inch diameter orifice and is calibrated to tip at 0.01 inch or 0.1 mm of rainfall. The system includes a separate data logging module based on the 4100 Series Logger platform.
Applications: The system is suitable for sewer overflow monitoring, watershed surveys, inflow and infiltration studies, and general rainfall measurement.
Standard Features:
  • Three-point leveling and integral bubble level for accurate alignment.
  • Sapphire jewel bearings are spring-loaded for durability and consistent operation.
  • Screens prevent debris from clogging the gauge.
  • 50-foot cable for flexible logger positioning.
  • High data logging capacity and long battery life.
  • Sampler triggering based on rainfall conditions.
  • Optional phone modem for remote alarms and data retrieval.
Specifications:
  • Rain Gauge: Tipping bucket type, 50 ft. cable, spring-loaded sapphire bearings, 8 in. orifice diameter, sensitivity of 0.01 inch or 0.1 mm, accuracy of ±1% at 2 in/hour, capacity of 22 inches/hour, hermetically sealed magnetic proximity switch, operating temperature 32° to 140°F.
  • Data Logger: Size 10.5 x 9.0 x 6.0 in, weight 8 lbs, NEMA 4X, 6 (IP67) enclosure, operating temperature 0º to 140ºF, data storage of 230,000 bytes, typical battery life of 2 years with 1-hour interval, communication via serial connection.
Ordering Information: The system includes the rain gauge, data logging module, and cable. Part numbers are provided for English and Metric versions, Flowlink Software, and interrogator cable.
Additional Information: The Isco Flowlink software facilitates data analysis in combination with flow data from multiple sites. Teledyne Isco reserves the right to change specifications without notice.
See more

Catalog excerpts

676 Rainfall Logging System-1

Isco 676 Rainfall Logging System The Isco 676 Rainfall Logging System uses a tipping bucket rain guage with precision sapphire bearings for accurate rainfall measurement. It has an 8-inch diameter orifice and is factory-calibrated to tip at either 0.01 inch or 0.1 mm of rainfall. The separate data logging module is based on the proven 4100 Series Logger platform. Applications cMOM and CSO/SSO programs (Sewer overflow monitoring and prevention) TMDL and Watershed surveys Inflow and infiltration studies General rainfall measurement Standard Features Three-point leveling and integral bubble level make it easy to align the rain gauge for maximum accuracy. Sapphire jewel bearings on the tipping bucket are spring-loaded to prevent damage to the bearings and ensure consistent operation over a wide temperature range. Screens cover all openings to prevent leaves, insects, and other debris from clogging the gauge. Included 50-foot cable connects rain gauge and data logger, allowing logger to be positioned for convenient data retrieval. High data logging capacity and long battery life enable extended deployment and reduce the need for frequent site visits. Sampler triggering based on programmed rainfall conditions. Optional phone modem enables remote voice-message alarms, and data retrieval using Flowlink software. The separate rain gauge and logger allow great flexibility in setting up for a wide range of monitoring site requirements.

 Open the catalog to page 1
676 Rainfall Logging System-2

Specifications: Isco 676 Rainfall logging system 674 Rain Gauge Type: Connect cable: Bearings: Orifice Diameter: Sensitivity: Accuracy: Tipping bucket 50 ft. (15.2 m), 2 conductor with 4-pin plug Spring-loaded sapphire jewel 8 in. (20 cm) English - 0.01 inch; Metric 0.1 mm English - ±1% at 2 in/hour; +3%/-4% up to 5 in/hour Metric - ±1.5% at 5 cm/hour; +3.5%/-9% up to 13 cm/hour English – 22 inches/hour Metric – 38 cm/hour Contact closure of at least 50 millisecond duration Hermetically sealed magnetic proximity switch. Normally open, 200V DC, 0.5 A maximum. 13 in. (33 cm) Operating Temperature:...

 Open the catalog to page 2

All Teledyne Isco catalogs and technical brochures

  1. ReaXus 6010R

    2  Pages

  2. L1150 AQ700

    2  Pages

  3. ELSD

    4  Pages

  4. Combiflash

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.