65DM Syringe Pump
2Pages

{{requestButtons}}

Catalog excerpts

65DM Syringe Pump - 1

PRODUCT DATA Teledyne Isco Syringe Pumps 65DM High Pressure Syringe Pump 10,000 PSI FOR LOW FLOW RATE APPLICATIONS The new 65DM syringe pump provides precise, predictable flow and pressure control at flow rates from sub-microliter to 30 ml/min. Exceptional low-flow stability at up to 10,000 psi makes this the ideal pump for high pressure applications from deep well core analysis to multi-dimensional capillary LC using small-bore packed capillary columns. The D-series controller has a keypad and LCD, as well as built-in and optional interfaces for computer control and other devices. Programming is easy and flexible, with instant access to menu screens even when the pump is running. This allows you to change operating parameters on the fly. An optional extension cable lets you locate the controller up to 50 feet from the pump. The 65DM pump module has a single-ratio drive train with auto-lubricating gears for long life and low maintenance. Special fittings are used to prevent leaks and ensure safety at maximum pressure. Wetted materials are compatible with most aqueous and organic liquids, corrosive solutions, heated fluids, liquefied gases, viscous fluids, or slurries and pastes. Applications High-pressure experiments requiring precision control Proteomics research using nanobore capillary packed columns Rock core analyses for hydrocarbon recovery studies in deep-well reservoirs Reactant feed in chemical process development, catalyst evaluation, plastic formation Standard Controller Features Operating Modes External Interface Constant flow or pressure with up to three pumps Gradient LC programming Flow or pressure programming with a single pump RS232 serial interface Analog voltage inputs Digital inputs and outputs Teledyne Isco, 4700 Superior Street, Lincoln, NE 68504 USA Phone: (800) 228-4373 / (402) 464-0231 iscoinfo@teledyne.com / www.isco.com

Open the catalog to page 1
65DM Syringe Pump - 2

Pump Module: Capacity: Flow Range (mL/min): Flow Accuracy: Displacement Resolution: Motor Stability: Pressure Range: Standard Pressure Accuracy: Optional Pressure Accuracy: Wetted Materials (Standard): Plumbing Ports: Operating Temperature: Power Required: Dimensions (H x W x D) Weight: Standards Conformity: 65DM 67.97 mL 0.01 µL/min - 30 mL/min + 0.3% of setpoint, (Maximum 0.25 μl/min seal leakage) 2.55 nl/step + 0.001% per year 0.7 - 689 bar (10 - 10,000 psi) 0.5% FS 0.1% FS Nitronic 50, Graphite filled PTFE, TFE, Hastelloy C-276, inert polymers 1/8” Valco 5 - 40o C Ambient 100 VAC, 117...

Open the catalog to page 2

All Teledyne Isco catalogs and technical brochures

  1. ReaXus 6010R

    2 Pages

  2. L1150 AQ700

    2 Pages

  3. ELSD

    4 Pages

  4. Combiflash

    2 Pages

Archived catalogs