Catalogs >
Teledyne Isco >
4501 Pump Station Monitor

4501 Pump Station Monitor
2Pages

Catalog excerpts

Isco 4501 Pump Station Monitor Lift Station flow measurement and performance monitoring. The 4501 monitors lift station operation as the wet well fills and is emptied.The 4501 uses patented* algorithms to calculate flow into and out of the pump station, as well as the pumping rate of each pump. Pump activity data is stored in the 4501 for transfer to a PC with Isco Pumplink™ Software. By using drawdown calculations rather than manufacturers’ pump curves, the 4501 Pump Station Monitor measures influent flow and pump capacity within 1% at most pump stations. Applications CMOM, I&I, and other sewer flow monitoring Billing Pump station performance studies Proactive maintenance programs Record alarms such as high levels and intrusion Pace a sampler to collect a flowproportioned sample activate a dialer when an alarm condition occurs Detect pump problems before they cause sewer backups Intermittent electrical problems develop at more than 30% of pump stations before the situation is detected by an operator. The 4501 Monitor exposes abnormal pump activity so that you can perform proactive maintenance to prevent serious, expensive problems – or failures that could result in sewer backups. Common problems that can be detected with the 4501 and Pumplink Software include: alternator failures Features Easy to install. Simply connect the inputs to anything that turns on or off when the pumps are activated, such as elapsed timers, indicator lights, or pump motor starters. The optional current clamps avoid termination. No calibration; no level sensors to install. Compact design and ease of installation make the 4501 ideal for portable use. Eight analog inputs for logging other parameters, such as flow or level. chattering relays variations in pumping rate jammed/worn impellers changes in level switches stuck check valves power failures Pumplink Software Pumplink Software sets up the data logging parameters and makes it easy to analyze and store information on pump station flows and pump performance. Retrieve data via direct serial connection or modem, then use Isco Pumplink as a desktop application to analyze and manage your data, and generate informative graphs and reports for an entire network of lift stations.

Open the catalog to page 1

Isco 4501 Pump Station Monitor Size (HxWxD): Weight: Material: Enclosure: Power: Storage Temperature: Display: Keypad: 3.75 x 3.75 x 7.1 in. (9.5 x 9.5 x 18.1 cm) 1.4 lbs. (0.63 kg) Polyphenylene oxide Standard ¼ DIN; Portable protective enclosure with carrying handle is optional 12V DC, 250 mA -40 to 140°F (-40 to 60°C) Backlit liquid crystal, 2 lines, 32 characters membrane, 4 position Capacity: Storage Mode: Program Memory: Data Retrieval: Data Analysis: 29,000 events maximum Rollover Battery backed RAM; can be updated via interrogator port without opening the enclosure Direct RS-232...

Open the catalog to page 2