PRODUCT DATA Teledyne Isco Syringe Pumps 100DX High Pressure Syringe Pump 10,000 PSI FOR HIGH PRESSURE APPLICATIONS The 100DX syringe pump provides precise, predictable flow and pressure control at flow rates from sub-microliter to 50 ml/min. Exceptional low-flow stability at up to 10,000 psi makes this the ideal pump for high pressure applications from deep well core analysis to multi-dimensional capillary LC using small-bore packed capillary columns. The D-series controller has a keypad and LCD, as well as built-in and optional interfaces for computer control and other devices. Programming is easy and flexible, with instant access to menu screens even when the pump is running. This allows you to change operating parameters on the fly. An optional extension cable lets you locate the controller up to 50 feet from the pump. The 100DX pump module has a single-ratio drive train with autolubricating gears for long life and low maintenance. Special fittings are used to prevent leaks and ensure safety at maximum pressure. Wetted materials are compatible with most aqueous and organic liquids, corrosive solutions, heated fluids, liquefied gases, viscous fluids, or slurries and pastes. Applications Precision fluid addition in research and manufacturing Reactant feed in chemical process development, catalyst evaluation, plastic formulation Accurate metering of liquefied gases Standard Controller Features Operating Modes Constant flow or pressure with up to three pumps Gradient LC programming Flow or pressure programming with a dual pump External Interface RS232 serial interface Analog voltage inputs Digital inputs and outputs Teledyne Isco, 4700 Superior Street, Lincoln, NE 68504 USA Phone: (800) 228-4373 / (402) 464-0231 [email protected] / www.isco.com

Pump Module: Capacity: Flow Range (mL/min): Flow Accuracy: Displacement Resolution: Motor Stability: Pressure Range: Standard Pressure Accuracy: Optional Pressure Accuracy: Wetted Materials (Standard): Plumbing Ports: Operating Temperature: Power Required: Dimensions (H x W x D) Weight: Standards Conformity: 100DX 102.93 mL 0.01 µl/min - 50 mL/min + 0.3% of setpoint, (Maximum 0.25 μl/min seal leakage) 9.65 nl/step + 0.001% per year 0.7 - 689.5 bar (10 - 10,000 psi) 0.5% FS 0.1% FS Nitronic 50, Graphite filled PTFE, TFE, Hastelloy C-276, inert polymers, gold, titanium 1/8” Valco 5 - 40o C Ambient...