Catalogs >
Teledyne Isco >
1000HL Syringe Pump

1000HL Syringe Pump
2Pages

Catalog excerpts

PRODUCT DATA Isco Syringe Pumps 1000HL Hazardous Location Syringe Pump APPROVED BY UL/DEMKO FOR CLASS I, DIV 2 OR ZONE 2 ENVIRONMENTS The Isco HL-Series pumps give you the same accurate, predictable flow and pressure control as our standard D-Series, while conforming to safety standards for use in UL Class I, Division 2, Groups A B C & D, T4 or Zone 2, II 3G EEx nC IIC T3 environments. Suitable for installation in locations providing adequate protection against the entry of solid foreign objects or water capable of impairing safety. The Hazardous location rating is achieved through internal design modifications including the use of brushless DC motors. This approach eliminates the need for purge boxes or other additional safety devices. The HL controller has a keypad and LCD, as well as built-in and optional interfaces for computer control and other devices. Programming is easy and flexible, with instant access to menu screens even when the pump is running. This allows you to change operating parameters on the fly. Wetted materials are compatible with most aqueous and organic liquids, corrosive solutions, heated fluids, liquefied gases, viscous fluids, or slurries and pastes. If needed, optional materials such as Hastelloy C-276 are available on request. Applications ä Metering and dispensing in experiments and pilot plants where ignitable concentrations of gases, vapors, or liquids are not likely to exist under normal operating conditions. ä Precision fluid addition in research and manufacturing processes ä Reactant feed in chemical process development, catalyst evaluation, plastic formulation ä Accurate metering of liquefied gases Standard Controller Features Chemical Compatibility Operating Modes Wetted materials have been tested for compatibility with the following fluids. ä Constant flow or pressure with up to three pumps ä Continuous flow or pressure with dual pump External Interface ä RS232 serial interface ä Analog voltage inputs ä Digital inputs and outputs ethane butane diesel fuel isopropanol benzene ethylene butadiene jet fuel acetone ethylbenzene propane hexane ammonia acetonitrile propylene gasoline methanol heptane

Open the catalog to page 1

Flow range (ml/min): Flow accuracy: ± 0.5% of setpoint, (maximum 1.5 µl/min seal leakage) Displacement resolution: Motor stability: Pressure range: Standard pressure accuracy: Optional pressure accuracy: Wetted materials (standard): Nitronic 50, Hastelloy C-276, Titanium, Gold, Graphite filled PTFE, TFE, Inert polymers Plumbing ports: Operating temperature: Power required: Pump unit – 36.5 kg, Controller – 2.96 kg Standards conformity: Isco is continually improving its products and reserves the right to change specifications without notice. 1000 HL Options & Accessories ä Hastelloy 276 or...

Open the catalog to page 2