*mydirectindustry

SITEX D2506

Product catalog summary

Overview: The SITEX D2506 is a portable X-ray generator designed for reliability, quality, performance, and ruggedness. It is manufactured by Teledyne ICM, located in Belgium.

Specifications:

Unit SCU 2.0: Operates on a supply voltage range of 90 to 264 VAC and a frequency range of 45 to 66 Hz. It has a maximum input power of 2 kVA and a power factor of 0.98 at full power. The unit features a kV accuracy of ±0.5% and mA accuracy of ±0.5%, with selection steps of 1 kV and 0.1 mA respectively. The timer range is from 00:15 to 99:59 minutes:seconds.
Unit SITEX D2506: Offers a directional X-ray beam with an output voltage range of 70 to 250 kV and a tube current range of 1 to 6 mA. It has a steel penetration capability of 54 mm and a leakage dose at 1 m of less than 10 mSv/h. The unit is waterproof with an IP65 rating and operates in temperatures from -25°C to +70°C.

Features:

Includes independent START and STOP buttons, a two-position safety key rotary switch, and a vacuum fluorescent display with anti-reflection screen.
Equipped with pilot light indicators in green, red, and yellow, and a pre-warning time setting from 3 to 99 seconds.

Dimensions and Weight:

SCU 2.0: Weighs 14.6 kg and measures 355 mm (W) x 157 mm (H) x 525 mm (D).
SITEX D2506: Weighs 28 kg and has overall dimensions of Ø346 mm x 771 mm.

Environmental Conditions: The device can be stored in temperatures ranging from -40°C to +80°C and is designed to withstand various environmental conditions with its rugged construction.

Additional Information: The specifications are subject to change without prior notice, and the device includes accessories such as an ALUCASE, tripod, and flashing light.

Catalog excerpts

YOUR RELIABLE PARTNER SITEX D2506 Portable X-Ray Generators

Open the catalog to page 1

Quality, Performance, Ruggedness DIRECTIONAL, PANORAMIC & CRAWLER AUTOCORRECTION X-RAY BEAM Supply voltage range Maximum input power Supply frequency range Power supply Output voltage range Cos(phi) / power factor at full power 230Vac Type of power supply Mains, generator set, inverter Tube current range Tube current at full output Maximum power at the anode Constant power mode Steel penetration (**) Weight (excluding hand rings) Overall dimensions Leakage dose at 1 m at full output Optical focal spot according to IEC336 Operating weight Inherent filtration Waterproof level Maximum useful angle...

Open the catalog to page 2

SITEX D2506

SITEX D2506

Catalog excerpts

Archived catalogs