Catalogs >
Teledyne Hastings Instruments >
high flow meters & controllers

high flow meters & controllers
11Pages

Catalog excerpts

www.teledyne-hi.com HFC-D-308A/B Digital Flow Controller HFM-D-306A/B Digital Flow Meter HFM-306 Analog Flow Meter FEATURES • Available Flow Ranges: 0-2500 slm to 0-10,000 slm (N2) • Operating Pressure to 300 PSI • NIST Traceable Calibration • RS232/RS485 (Digitals Only) • Totalized Flow (Digitals Only) APPLICATIONS • Alternate Energy • Fuel Cell R&D • Secondary Calibration Reference • Specialty Gas Delivery • Custody Transfer BENEFITS • Enhanced Accuracy • Superior Linearity • Rapid Settling Time HFM-306 Analog Flow Meter TELEDYNE HASTINGS INSTRUMENTSEverywhereyoulook&qu

Open the catalog to page 1

Teledyne Hastings Instruments products represent over 70 years of experience in the design and manufacture of gas flow instrumentation. The high flow meters and controllers featured in this document are based on the 300 Series line of flow sensors. The 300 Series transducer is a patented thermal based flow sensor. This sensor is designed to provide exceptional linear response to changing flow rates. In addition, the electronics associated with the sensor are precisely tuned to give fast response time. The flow transducer is combined with a laminar flow element to configure the flow meter...

Open the catalog to page 2

Flexible 15-Pin connector for analog I/O LEDs (2) provide status and flow conditions Easily configurable digital communications LEDs (2) provide status and flow conditions

Open the catalog to page 3

Performance Full Scale Flow Ranges (N2) Microprocessor-based Enhanced Accuracy and Digital Features Accuracy Repeatability Operating Temperature Warm up time Temperature Coefficient of Zero Temperature Coefficient of Span Operating Pressure -Maximum Electrical Voltage Power “A” Series Power “B” Series Physical Weight (approx.) Wetted Materials 2,500 to 10,000 SLM YES ± (0.5% Rdg + 0.2% FS) ± 0.15% of FS -20° - 70°C 30 min optimum accuracy 2 min for ± 5% of full scale Auto-zero when Valve is Closed Maximum ±0.1%(Rdg)/°C (-20—70°C) 300 psig 11 -36 VDC (±12, ±15 acceptable) 15 VDC min. for...

Open the catalog to page 4

Selection Chart HFM-D-306A & HFC-D-308A Model Number Circuit Board Circuit Board 01 Pinout H (Std) 01 02 03 04 Output 0-5 Volt (Std) 0-10 Volt 4-20 mA 0-20 mA Fittings 01 1” Compression 02 1 1/2” Compression 03 2” Compression (Std) Seals 01 Viton (Std) 04 Buna-N 02 Kalrez (Meter Only) 03 Neoprene (Meter Only) Calibration Type 1 NIST Traceable Calibration Report (Std) 2 NIST Traceable Calibration Reports 3 NIST Traceable Calibration Reports 4 NIST Traceable Calibration Reports 5 NIST Traceable Calibration Reports 6 NIST Traceable Calibration Reports 7 NIST Traceable Calibration Reports 8...

Open the catalog to page 8

www.teledyne-hi.comSelection Chart HFM-D-306B & HFC-D-308B Model Number

Open the catalog to page 9

Model Number

Open the catalog to page 10

THCD-100 Single Channel Power Supply Meter THCD-100 Includes brackets, connectors, and backshells 24 VDC Switching Power Supply 12-01-169 For use with “B' Series or THCD-100 (Please specify AC Input Clip) Flow Transducer Cable Part Numbers: Connect Hastings Power Supply to “A” Series Flow Meters & Controllers AF-4-AM World Wide Web: http://www.teledyne-hl.com E-mail: hastings_instruments@teledyne.com 804 Newcombe Ave. Hampton, VA 23661 “A” Series—Serial Communication Cable: CB-RS232-RJ12 RS232 Cable (9-Pin “D” Female to RJ12) “B” Series—Serial Communication Cable: CB-RS232-TRRS RS232...

Open the catalog to page 11