Catalogs >
Teledyne Hastings Instruments >
HFM 200 with laminar flow element

HFM 200 with laminar flow element
4Pages

Catalog excerpts

TELEDYNE HASTINGS INSTRUMENTS HIGH CAPACITY MASS FLOWMETERS HFM-200 with LFE DESIGN FEATURES The Teledyne Hastings Instruments (THI) Model HFM Mass Flowmeter represents a culmination of over 55 years of experience in designing and manufacturing reliable, high quality mass flow instruments. The HFM Series of flow instruments is based on a modular design. At the heart of each instrument is an insulated thermal transfer sensor which provides enhanced zero stability. This sensor is designed to be removable/replaceable in the field to virtually eliminate long down time due to clogging. Additionally, the HFM design features an integral filter and an easily replaceable closed loop electronics card.* All of these standard features, when coupled with the instrument’s inherent linear response to flow changes and THIs’ long-proven reputation for quality, result in the finest flowmeters and flow controllers available today. Model HFM-200 with LFE THI Model HFM-200 Flowmeters with an LFE offer the user fast, accurate measurement of high-capacity gas flows, in ranges from 25 slm up to 15,000 slm. Our laminar flow elements (smoothed, flanged, or threaded) are available in various sizes from 3/8” up to 8”. Used in conjunction with the standard HFM Flowmeter, these units can be combined to measure full-scale flows up to 15,000 slm and feature a typical pressure drop of 4.5” of water at full-scale flow. *Note: After changing components, instruments require recalibration to meet accuracy specifications. Model HFM-200 with LFE FEATURES • Inherently Linear Response • Excellent Rangeability • Modular Construction • ± 1% Full-Scale Accuracy1 • Range — 25 to 15,000 slm (Air Equivalent) • NIST Traceable Calibration APPLICATIONS Model HFM-200 with LFE For All High-Capacity Gas Flow Measuring Needs: • Bulk Gas Handling • Furnace Fuel Measurement • Gas Blending • Medical Research • R&D and Process Flows • Pollution Monitoring Various LFE Configurations

Open the catalog to page 1

SPECIFICATIONS HFM-200 with LFE Accuracy1 and Linearity ±1% F.S. Repeatability (typ.) ±0.05% F.S. Leak Integrity < 1x10-7 sccs Temperature Coefficient Zero ±0.1% FS/oC (0-50°C) Span ±0.15% RDG/oC (0-50°C) Power ±15 VDC at ±30 mA Flow Signal (inherently linear) 0-5 VDC or 4-20 mA Wetted Material 316SS, Viton®, 87/13 Au/Ni Braze Connector 15-pin subminiature D Fittings See Selection Chart Below Standard Working Pressure 150 psig for flanged LFEs 500 psig for threaded or smooth LFEs Working Pressure (transducer) 500 psig 1See Product Manual for critical information on instrument accuracy and...

Open the catalog to page 2

MODEL HFM-200 WITH LFE Typical instrument ordering/options number: Model No. Circuit Output Fittings O-Rings Working Calibration Board Pressure Type HFM-200 01 01 01 01 01 01 Order No. Options Circuit Board 01 Standard 02 Fast Response - No RF rejection Output 01 0-5 Volts (Standard) 02 4-20mA Fittings 01 See LFE selection chart O-Rings 01 Viton (Standard) 02 Kalrez 03 Neoprene Order No. Options Working Pressure 01 500 psig (Standard) 02 1000 psig Calibration Type 01 NIST 5 Point (Standard) 02 NIST 10 Point 03 NIST 20 Point Range Information Range _____________________________ Flow Units...

Open the catalog to page 3

Your Customer Service Representative Telephone: (757) 723-6531 Toll Free: (800) 950-2468 Fax: (757) 723-3925 World Wide Web: http://www.teledyne-hi.com E-mail: hastings_instruments@teledyne.com P.O. Box 1436 Hampton, VA 23661 PB 140C-10/05 © Teledyne 2005. All Rights Reserved. MODEL HFM-200 WITH LFE

Open the catalog to page 4