Fixed Gas & Flame Detection Product Overview - APAC
20Pages

Fixed Gas & Flame Detection Product Overview - APAC Region

Contents Fixed gas detectors Control systems Customised Systems and Solution 18 Sampling solutions Samsys Sampling cabinet with detector 14 MX 62 14 Multisafe - MX Fixed gas detectors Wireless Technology Backup batteries Solenoid valves Manual call points Audible and visual alarms 17 SW-AV Series alarms

Fixed Gas & Flame Detection With the acquisition of Detcon, Oldham Simtronics and GMI, Our products are sold through a world class system of Teledyne has become one of the largest manufacturers of gas knowledgeable distributors, manufacturers’ representatives and flame detection products. These global brands bring and sales subsidiaries. Our customer commitment does together over 100 years of industry experience across a wide not stop at product delivery but encompasses ongoing range of innovative detection solutions. This adds significant services. From custom-designed solutions to...

The mission of Teledyne Gas & Flame Detection is to be the best supplier of fixed gas and flame detection systems worldwide. We endeavor to provide the highest quality and the best service to all of our customers. Are you looking for the best solution for your application? SERVICES Visit our website to find your nearest branch: www.teledynegasandflamedetection.com. Our teams will answer your questions and take the time to Commissioning: Our technicians ensure that your equipment is properly installed and in establish your gas and flame detection needs. good working order, while following...

(for light industry / commercial) OLC 10/OLCT 10 Designed to detect combustible gases and exhaust gases • Up to two OLC 10's TWIN's per channel • Up to five OLCT 10's per channel • Wheatstone bridge (OLC 10) or 4-20 mA output (OLCT 10) The OLC 10 and OLCT 10 are designed to detect combustible or toxic gases for tertiary applications (boiler plants, battery charging rooms, car parks, hospitals). Two OLC 10's can be connected to one detection channel to monitor the same area, without an additional junction box or extra wiring. Similarly, up to five OLCT 10's can be connected to one channel...

CTX 300 Designed to detect toxic gases or oxygen in general purpose areas • 4-20 mA output transmitter with optional backlit display • 2-wire loop power supply option (electrochemical version) The CTX 300 is designed to detect toxic gases or oxygen in general purpose areas in the industrial or tertiary sectors. The CTX 300 is equipped with sensors that are pre-calibrated at our factory, facilitating maintenance and more specifically sensor replacements. Gases Detected: more than 30 toxic gases, O₂, CO₂, VOCs, Freons Technology: Infrared, Electrochemical or Semi-Conductor Power Supply: 15-32...

OLC 100/OLCT 100 Designed to detect all gases in areas classified as having an explosion risk • SIL2 certification (LEL, O2, CO, H2S, NH3) • Stainless steel option available • High temperature version up to 200°C Intended for industrial applications, OLCT 100 gas detectors have an economical design and are reliable, durable, and easy to use. The range is available in Wheatstone Bridge version (OLC) or in 4-20 mA-output analog transmitter version (OLCT). The 100 series is available in explosion-proof and intrinsically safe versions. The OLC 100 and OLCT 100 are SIL2-certified according to...

DG-7 Series Analog transmitter with display for detecting all gases in areas classified as having an explosion risk • • • • Non-intrusive, one-man calibration Pre-calibrated sensors 3 optional relays HART communication protocol DG-7 gas detectors are designed for easy operation and maintenance, and use a broad range of sensors. The electrochemical sensors are certified as intrinsically safe and can be replaced without disconnecting the detector. Made entirely of stainless steel and equipped with a bright display that changes colour depending on the status (alarm, fault, normal,...

700 Series Analog transmitter with display for detecting all gases in areas classified as having an explosion risk • Specially designed for harsh environments and extreme conditions • Water-resistant, corrosion-resistant, and vibration-resistant • Non-intrusive, one-man calibration The 700 Series has been designed for use in extreme environmental conditions. Its housing is made entirely of stainless steel and the electronics are encapsulated in resin to protect them from the external environment. The detection sensors are “smart”. They are pre-calibrated at our factory and can be recognised...

Quasar 900 SafeEye Open Path Infrared to detect combustible gases • • • • Detection range up to 200 meters Heated optics 10-year warranty for source SIL2-certified by TÜV-Rheinland The SafeEye detector comprises an infrared transmitter and a receiver separated by 4 to 200 meters, meaning it can replace up to 20 point detectors. With IP66/67 certification, heated optics and a stainless steel construction, the SafeEye was designed to operate in harsh environments, and can handle up to 90% signal attenuation caused by dust, fog, rain, snow, or vibrations. SIL2-certified, the SafeEye has a...

DF-TV7 Series Triple IR & UV/2IR flame detectors • Excellent immunity to false alarms • Wide field of vision (up to 120°) • Continuous monitoring of optics The DF-TV7-T includes three infrared detectors to detect hydrocarbon fires up to 80 meters away. It is designed for detecting hard to detect fires that generate a large amount of smoke. The DF7-T is the first SIL3-certified flame detector! The DF-TV7-V combines infrared and ultraviolet detectors for increased immunity to false alarms and a shorter response time. The DF-TV7-V detects hydrocarbon fires up to 45 meters away and is...

Alarm Stations Surveyor 4B Single-channel controller without display • Economical solution for small units (boiler plant, battery charging room) • 2 programmable alarm thresholds The Surveyor 4B is a single-channel controller designed to detect combustible gases in boiler plants, battery charging rooms, and more generally in small units that need one or two detectors. It has two different alarm thresholds and built-in relays. It can be easily mounted to a DIN rail. Input: Wheatstone Bridge sensor Outputs: 2 relays (1 common gas and fault, 1 gas) Power supply: 1 to 14 Vcc or 207 to 242 Vca...