Catalogs >
Teledyne DALSA >
Xineos 2121

Xineos 2121
2Pages

Catalog excerpts

CMOS Flat Detector for Dynamic X-Ray Imaging Xineos CMOS X-ray Flat Detectors. High Speed, Low Dose Imaging at Full Resolution. Utilizing Teledyne DALSA’s proprietary Rad-Hard CMOS Active Pixels, the Xineos family of CMOS X-ray Flat Detectors is the industry’s first to exceed the low dose performance of Image Intensified detectors whilst providing all the benefits of flat panel detectors. All of this at full speed and full resolution while setting new industry benchmarks in DQE, low power dissipation and radiation lifetime. The Xineos-2121 is available for Dental, Industrial and Scientific X-ray purposes. These Dynamic X-ray applications benefit from 30 fps frame rates at full resolution combined with exceptionally low noise and elimination of image artifacts. Region of Interest (ROI) modes can be used to capture small regions of interest at 200 fps or faster. • Monolithic Crystaline Silicon • CMOS Active Pixel Design • 135 µm pixel pitch Specifications (Typical Values @ RQA5) • Best in class DQE at all doses • High MTF • Long X-ray Lifetime • Low readout noise • Low image lag • Low dark current • Up to 30 fps at full resolution • 200 fps or more in Panoramic Mode • GigE data interface • CsI scintillator Typical Applications • LFOV Dental CBCT • Frame Based Panoramic Imaging • Industrial CBCT • Scientific X-ray Crystallography • Veterinary Imaging CMOS Pixel Array 1536 x 1536 Pixel Size 135 µm x 135 µm X-ray Sensitive Area 208 mm x 202 mm Energy Range 40 kV to 120 kV Saturation Dose Per Frame 1 mR in Dynamic Range Mode 100 µR in Low Dose Mode Frame Rates 30 fps Pulsed X-ray Mode full resolution, 15 ms exposure window 30 fps Continuous X-ray Mode 100% continuous integration time >200 fps Panoramic Mode 100% continuous integration time Bit Depth 14 bits Typical Dynamic Range 66 dB in Low Dose Mode 74 dB in Dynamic Range Mode DQE (@ 0lp/mm, RQA5) 75% @ 50 µR, 65% @ 0.1 µR (CsI Scintillator) MTF (@ 1lp/mm, RQA5) 60% (CsI Scintillator) Image Lag <0.1% (Silicon Performance) Non-Linearity <1.5% Data and Control Interface GigE Vision (using CAT6 Cable) External X-ray Pulse Sync TTL Master and Slave configurations Power Supply +12 VDC Detector Power Consumption Readout 15 W, Standby 10 W, Hibernate 5 W Lifetime X-ray Dose 1 MegaRad Mass 7.3 kg

Open the catalog to page 1

CMOS Flat Detector for Dynamic X-RaylmagrT^^ Large format detector Single tile detector The Complete Xineos Family After 50 years of Image Intensifier (II) dominance in low dose X-ray applications, Teledyne DALSA has introduced a complete family of CMOS X-ray Flat Detectors. Xineos sets new benchmarks never before achieved by II cameras or flat detectors. X-Ray Detector DQE(O) @ RQA5 with following connectors: • 12V Power Supply to Detector Connector type: Male 9 pin D-sub Connector type: Lemo EXG.1 B.304.HLN • GigE Data and Control Interface Connector type: HALO HFJ11-1G16E-L12RL • 5 V...

Open the catalog to page 2