Shad-o-Box HS Product Family Key Features • Large active area up to 10x15 cm • Up to 10 lp/mm resolution • Gigabit Ethernet interface (Camera Link optional) • 14-bit digital video output • Energy range from 10 to 225 kV • Ready-to-run software and drivers Teledyne DALSA’s Shad-o-Box HS product family of digital x-ray cameras offers users a high-speed, high-performance x-ray imaging detector with a fast, reliable Gigabit Ethernet interface. The cameras in this product line are capable of frame rates up to 66 fps (even higher in 2x2 binned mode), and communicate via a standard Cat6e data cable over lengths up to 100m. The detectors are available with different scintillator options to address a range of resolution and sensitivity requirements, making this camera an ideal choice for industrial inspection, biomedical and scientific x-ray imaging applications. The Shad-o-Box HS product line leverages Teledyne DALSA’s advanced CMOS image sensing technology, which enables the delivery of low-dose x-ray images and yields higher image quality than a-Si flat panels and image intensifier devices. Camera features include: (1) large active area of up to 10 x 15 cm; (2) several different resolution (pixel size) options; (3) fast, real-time image transfer via Gigabit Ethernet interface; (4) 14-bit digitization of images; and (5) SDK’s, drivers and programming support. The camera interface allows easy access to features such as adjusting the frame rate, single and multiple frame acquisitions, and control of advanced timing modes. Each camera ships with our ShadoCam Imaging application and Teledyne DALSA’s CamExpert software, which provide simple, user-friendly tools for communicating with the camera and acquiring images. Teledyne Rad-icon Imaging Corporation | 3400 Garrett Drive, Santa Clara, CA 95054 (408) 736-6000 | [email protected] | www.teledynedals

Description Shad-o-Box HS cameras contain a large-area, high-resolution CMOS detector with a photodiode pixel array featuring four standard size options of approximately 2x2, 3x4, 4x6 and 5x5 inches. The cameras are available in different resolution models featuring either a 135µm, 99/100µm or 49.5µm pixel size. All detectors are capable of real-time, full-resolution imaging at frame rates up to 66 fps. The detector array consists of a single CMOS die (no tiling) that contains multiple output taps to enable high frame rates. The video signal is digitized to 14 bits, reassembled (deinterlaced)...

Specifications Detector Specifications Typ. dark current (23°C) Read noise (rms) Typ. dynamic range Readout period Max. frame rate (full res.) Output data rate (1) (2) (3) dark current doubles approx. every 8°C ADU = Analog-Digital Unit = 1 LSB (Least Significant Bit) time required to transfer image from sensor to camera memory Camera Specifications Typical supply voltage Supply voltage range Maximum supply current Typical power dissipation Camera interface Gigabit Ethernet Trigger connector General Specifications Operating temperature Storage temperature Humidity (non-condensing) Weight (4)...

Resolution & Sensitivity The Shad-o-Box HS cameras are designed to work with x-ray sources operating at a wide range of kVp settings. X-ray energies as low as 10-15 keV can be detected. The cameras can be used with x-ray energies as high as 225kV, although we recommend the use of additional shielding and/or collimation at higher energies in order to protect the sensor element and electronics from damage. The pixel spacing of each camera model determines the limiting resolution of the sensor. The actual Modulation Transfer Function (MTF) of the detector depends on the type of scintillator that...

Mechanical Drawing: 512 & 1024 HS Models Data Connector: Power Connector: DC power jack, 2 mm center pin center pin: 6.5 VDC outside: ground TTL (open collector), opto-isolated Pin Pin Pin Pin Trig Trig Trig Trig Teledyne Rad-icon Imaging Corporation | 3400 Garrett Drive, Santa Clara, CA 95054 (408) 736-6000 |TDI_ [email protected] | www.teledynedalsa.com/ndt

Mechanical Drawing: 688/1548/3K/6K Models Data Connector: Power Connector: 2-pin LEMO EGG.0B.0302 Pin 1 Pin 2 TTL (open collector), opto-isolated Pin Pin Pin Pin Trig Trig Trig Trig Teledyne Rad-icon Imaging Corporation | 3400 Garrett Drive, Santa Clara, CA 95054 (408) 736-6000 |TDI_ [email protected] | www.teledynedalsa.com/ndt

Mechanical Drawing: Shad-o-Box 1280 HS Data Connector: Power Connector: 2-pin LEMO EGG.0B.0302 Pin 1 Pin 2 TTL (open collector), opto-isolated Pin Pin Pin Pin Trig Trig Trig Trig Teledyne Rad-icon Imaging Corporation | 3400 Garrett Drive, Santa Clara, CA 95054 (408) 736-6000 |TDI_ [email protected] | www.teledynedalsa.com/ndt

Mechanical Drawing: Shad-o-Box 1K HS Data Connector: RJ45 HALO HFJ11-1G16E-L12RL Power Connector: 2-pin LEMO EGG.0B.0302 Pin 1 Pin 2 Teledyne Rad-icon Imaging Corporation | 3400 Garrett Drive, Santa Clara, CA 95054 (408) 736-6000 |TDI_ [email protected] | www.teledynedalsa.com/ndt

Ordering Information Shad-o-Box HS cameras are available in a single, industrial image quality grade (blemish specification available on request). Specify option -01 for the Carestream Min-R® 2190 scintillator, or option -02 for a Mitsubishi Chemical DRZ-Std scintillator. Additional scintillator options may be available by request. All cameras ship with a universal input power supply (90-264V, 50-60Hz), power cord, Ethernet cable, software CD and User’s Manual. For international orders, please specify the type of power cord you require. Shad-o-Box 512 HS Camera (7x10cm, 135µm pixel) Shad-o-Box...