Remote RadEye Family
7Pages

Remote RadEye X-Ray Camera DATASHEET Key Features • Sensor module weighs 1kg or less • Choose from 4 different sensor modules that provide up to 100 x 100mm active image area • Choose from 3 different electronic modules: digital frame grabber, USB, or Ethernet interface • Choose from 3 different resolution options: 22.5µm, 48µm and 96µm The Remote RadEye™ x-ray camera provides the ultimate flexibility in design and product options for your complex imaging applications. Our unique camera design separates the x-ray sensor module from its supporting electronics: the module is mounted on a detachable cable enabling easy installation into tight spaces or on gantry systems. While other imaging solutions can be bulky and difficult to implement, the Remote RadEye is slim, lightweight, and housed in a rugged stainless steel package. The Remote RadEye is suitable for industrial inspection applications where images are taken in tight or difficult-to-reach spaces. In addition, system integrators gain flexibility in building cabinet systems or portable inspection applications. This revolutionary x-ray camera is a cost-effective imaging solution for NDT/industrial inspection, scientific research such as x-ray crystallography, and general radiography applications. • Supports x-ray energies as low as 5keV and up to 160kVp • 12- or 14-bit digital video output • Ready-to-run software and drivers Imaging Corporation a division of DALSA Description The Remote RadEye™ x-ray camera is a flexible, rugged and cost-effective solution for high-resolution radiation imaging. End users can choose between four different sensor modules, each of which contains a twodimensional CMOS photodiode array featuring up to 1200 by 1600 pixels with pixel spacing ranging from 22.5µm to 96µm. A Gd2O2S scintillator screen, placed in direct contact with the photodiode array, converts incident x-ray photons to light, which in turn is detected by the photodiodes. An EV option is available for operation in high-dose environments or with x-ray energies up to 160kVp, and models featuring a Beryllium entrance window can be used in low-energy applications down to 5keV.

Each sensor module features a rugged steel enclosure with a stainless steel cover and a carbon-fiber or Beryllium window that shields the sensor against ambient light and protects the sensitive electronics from accidental damage. A shielded cable connects the sensor head to a separate camera electronics module. Here the analog video signal is processed, digitized to 12- or 14-bit resolution, and prepared for transmission to a PC. The electronics module features either a high-speed parallel digital frame grabber interface, or a USB connection for use with a PC or laptop. Please refer to our...

Remote RadEye Camera Specifications Dynamic range RadEye 1 & 2 RadEye HR RadEye 200 Units Shad-o-Box (LVDS) Interface Sensor data rate 1500 Sensor data rate 1000 Weight of sensor head (6) 0.3/0.8 Weight of electronics module Operating temperature Storage temperature Humidity (non-condensing) (1) dark current doubles approx. every 8°C (2) ADU = Analog-Digital Unit = 1 LSB (Least Significant Bit) (3) 14-bit option available (Shad-o-Box only) (4) high-gain option (2x) available (5) time required to transfer image from sensor to memory (6) not including sensor cable(s) Rad-icon Imaging...

Resolution The intrinsic resolution of the detector within the Remote RadEye camera is determined by the pixel size of the individual sensor module that is chosen. The actual Modulation Transfer Function (MTF) for various scintillator options is shown in the following charts. A thicker phosphor screen will produce more signal, but at the expense of high-frequency contrast. Please refer to our application note AN07 for more information on scintillator performance and tradeoffs. RadEye1&2 MTF 0.8 hi-res GdOS Lanex Fine Rad-icon Imaging Corporation | 3193 Belick Street, Unit 1, Santa Clara, CA...

Ordering Information All Remote RadEye detectors can be ordered in two image quality grades - Standard and Premium. The default scintillator option is Kodak Min-R® 2190. Additional scintillators are available on request. Except for the Remote RadEye HR (10-90kV only), options for the 10-50kV energy range and for the 10-160kV range are available for all models. The camera modules are available with either a Shad-o-Box digital frame grabber interface or a Shad-o-Snap USB interface. Electronics modules ship with a universal input power supply (90-264V, 50-60Hz). Please specify the type of...

Mechanical Drawings Each Remote RadEye sensor module features a rugged, stainless steel housing that is optimized for each sensor size. The LEMO cable sockets are located at the short end of the enclosure opposite the sensor, whereas the DVI cable for the RadEye200 attaches on the long side of the sensor module. Mounting holes for M4 screws are located on the back of each housing assembly. Remote RadEye HR Sensor Head LEMO Connector Remote RadEyel Sensor Head active area Remote RadEye2 Sensor Head Rad-icon Imaging Corporation | 3193 Belick Street, Unit 1, Santa Clara, CA 95054

Remote RadEye200 The Remote RadEye200 sensor module consists of a tiled array of two RadEye100 image sensors in a rugged stainless steel enclosure the size of a paperback novel. Featuring a 1024x1000 pixel image area with 96µm pixel size for a roughly 10x10cm active area, the RadEye200 offers an unsurpassed abundance of silicon real estate in a compact, cost-effective package. The Remote RadEye200 sensor module is available in a base configuration with direct-coupled scintillator for the standard 10-50keV energy range. We also offer the sensor module in an EV model for highdose applications...