Catalogs >
Teledyne DALSA >
Falcon2 12M

Falcon2 12M
2Pages

Catalog excerpts

CMOS Color and Monochrome Area Scan Cameras The new Falcon2 CMOS area scan cameras delivers up to 12 megapixels of resolution at 58 fps with global shutter. The new Falcon2 12M, 8M and 4M—Teledyne DALSA’s new generation of color and monochrome area scan cameras—incorporate large resolutions and faster frame rates enabling high speed image capture with superb spatial resolution and improved image quality. Global shuttering removes unwanted smear and time displacement artifacts related to rolling shutter CMOS devices. These features make the Falcon2 cameras the best choice for applications where throughput, resolution and high pixel capacity matter most. Inside the Falcon2 camera is our latest CMOS sensors, which has reduced dark noise levels and improved dark offset, FPN (fixed pattern noise) and PRNU (Pixel Response NonUniformity) levels. Key Features • 12, 8 and 4 mega pixels • Selectable 4:3 or 1:1 aspect ratios • Global Shutter • Exposure control • Faster frame rates through windowing • Good NIR response • Built-in FPN and PRNU correction • GenICam compliant • Color and monochrome models available The Falcon2 cameras are compliant with GenICam™ and full Camera Link™ specifications— delivering 8 or 10 bits of data on 8 taps (frame rates are specified at 8 bits. Further, the M42x1 thread opening allows the use of your lens of choice. Programmability • Adjustable digital gain and offset • 8 or 10 bit selectable output • Adjustable integration time and frame rate • Test patterns and camera diagnostics Typical Applications • Semiconductor wafer inspection ∙ Surface and bump inspection • Electronics manufacturing ∙ 3D solder paste inspection ∙ Package and bump inspection ∙ Automated Optical Inspection (AOI) • 3D imaging—Laser profiling • Solar panel inspection • General machine vision Resolution Pixel Rate Max. Frame Rate Pixel Size Bit Depth Lens Mount Dynamic Range Exposure Time Size Mass Operating Temp Power Supply Power Dissipation Regulatory Compliance Data Interface Power Connector Example Part Number 4:3 aspect ratio: 12M—4096 (H) x 3072 (V) 8M—3328 (H) x 2502 (V) 4M—2432 (H) x 1728 (V) 1:1 aspect ratio: 8M—2816 (H) x 2816 (V) 4M—2048 (H) x 2048 (V) 8 x 76 MHz or 10 x 76 MHz 12M—58 fps / 8M—90 fps / 4M—168 fps, all at 8-bits * 6 μm x 6 μm 8 bits or 10 bits M42 x 1 58 dB (monochrome) and 50 dB (color) 20 µs minimum 60 mm (H) x 60 mm (W) x 80.5 mm (D) (75 mm deep excluding the back fins) < 300 g 0 °C to 50 °C, front plate temperature 12 V to 24 V DC 9.5 W CE and RoHS 2 x Full Camera Link—SDR26 Hirose 12-pin circular FA-80-12M1H-xx-R (monochrome), FA-81-12M1H-xx-R (color) * Maximum frame rates are dependent on the aspect ratio used.

Open the catalog to page 1

CMOS Color and Monochrome Area Scan Cameras Falcon2 Color 12M (4096x3072) Spectral Responsivity Falcon2 Monochrome 8M Spectral Responsivity 30 GreenRed GreenBlue Wavelength (nm) Note: 8 Taps, 10 bits Camera Link, FFC on, 24 fps (except 400 nm, measured at 10 fps), ND 0.3 filtered light IMAGE AREA CENTER OF IMAGE AREA Note: 8 taps 10 bits Camera link, 9 Bit sensor digitization, FFC on, color corrected, 4 fps (except for color red, which used different frame rate at wavelength 560nm and below: 400~480nm was done at 1.8fps, 500nm was done at 4fps and 520~560), BG 38 filtered light NOTES: 1....

Open the catalog to page 2