Pantera 1M30 Area Scan Cameras Overview 30 frames per second of full 1k by 1k resolution and 12 bit digitization gives you the speed to succeed in the most demanding applications. Key Features 12 bit digitization Exposure control and antiblooming 100% fill factor High sensitivity with low dark current Single tap readout Base Camera Link Programmability Selectable 8, 10, or 12 bit output Selectable binning Five selectable exposure modes Video mode and test pattern selection Typical Applications X-rays: medical and nondestructive test Medical imaging Microscopy Metrology The Pantera TF 1M30 camera provides high-sensitivity 12 bit images with 1k x 1k spatial resolution at up to 30 frames per second. The Pantera TF 1M30 is a frame transfer CCD camera using a TrueFrame™ progressive scan CCD to simultaneously achieve outstanding resolution and gray scale characteristics. A 12 μm square pixel format and 100% fill factor provide superior image quality even at low light levels. 12 bit performance provides up to 4096 distinct gray levels—perfect for applications with large interscene light variations. The low-noise, digitized video signal also makes the camera an excellent choice where low contrast images must be captured in challenging applications. Specifications Resolution Data Rate Max. Line/Frame Rate Pixel Size Data Format Output Lens Mount Responsivity Dynamic Range Nominal Gain Range Size Mass Operating Temp Power Supply Power Dissipation Regulatory Compliance Control Data Power Example Part Number 1024 x 1024 1 x 40 MHz 30 fps 12 μm 8, 10, 12 bit Base Camera Link M42 x 1, C, F mount 40 DN/(nJ/cm²) @ 540 nm,1x gain 66 dB 1x to 4x 94 mm x 94 mm x 45 mm 850 g 0 °C to 40 °C 12 V to 15 V <17 W CE MDR26 Camera Link Shared with Control Hirose HR10 6 pin DS-1A-01M30

Pantera 1M30 Area Scan Cameras This progressive scan camera uses Pantera TF 1M60 and 1M30 Responsivity TrueFrame™ Frame Transfer 48 Responsivity [DN/(nJ/cm2)] architecture—it has an on-chip shielded storage region and requires no shutter. 10.1 M42 X 1 X 4 DEEP M4 X .7 X 6 DEEP 2 PLACES EACH SIDE M4 X .7 X 6 DEEP 4 PLACES DIMENSIONS ARE IN mm +/- .3 TOLERANCE ON ALL DIMENSIONSPUNLESS OTHERWISE INDICATED Worldwide Sales, 605 McMurray Rd, Waterloo, Ontario, Canada N2V 2E9 Tel: 1.519.886.6000 [email protected] European Sales, Breslauer Str. 34, D-82194 Gröbenzell (Munich), Germany Tel: 49.8142.46770...