*mydirectindustry

Catalogs
Teledyne API
Model W1 + 465L Dissolved Ozone Analyzer

Model W1 + 465L Dissolved Ozone Analyzer

Product catalog summary

Overview
The document describes the Model W1 combined with a Model 465L Ozone Analyzer, which is designed to continuously measure dissolved ozone concentrations in liquids using a stripping column method and UV absorption technique. This system is noted for its high stability, accuracy, and reliability, making it suitable for various water treatment applications.

Features

Stripping Column and UV Absorption technique for accurate measurements.
Highly stable optical system and microprocessor-based technology.
Dual field programmable alarms and no consumables required.
Reliable, repeatable, and accurate performance.

Applications

Drinking Water Plants
Bottling Plants (Water or Beverage)
Pharmaceutical Plants
Water Treatment Plants

Specifications

Measuring Principle: Transfer method from liquid to gas, followed by UV absorption.
Measuring Range: 0-1, 0-2 mg/L (0-5 mg/L available upon request).
Resolution: 0.001 mg/L.
Linearity: Better than 99% throughout the range.
Zero Drift: Better than 0.005 ppm per month.
Standard Alarms: Two field programmable alarms with form C relay contacts.
Diagnostic Features: Continuous internal diagnostics with error messages.
Analog Outputs: 4-20 mA or 0-5 VDC standard.
Digital Outputs: RS-232 interface, MODBUS.
Supply Voltage: 100-240 VAC 50/60 Hz, 74W.
Water Flow Rate: 1.0 LPM (Gravity fed).
Gas Flow Rate: 1.0 LPM.
Connections: 1/4” compression fittings (gas), 1/4” compression or 3/8” barb (water).
Configuration: NeMA 4X IP65 Wall Mount.
Dimensions: M465 Ozone Analyzer: 16.85” x 15.60” x 6.90”; Transfer Column: 39.0” x 15.0” x 4.0”.
Operating Conditions: 5-45°C, 0-95% RH non-condensing.
Approvals: CE.
Warranty: 1 year.

Additional Information
The document notes that specifications are subject to change without notice and emphasizes the importance of constant conditions for accurate performance. It also highlights the availability of various models for different applications.

Catalog excerpts

Model W1 + 465L Dissolved Ozone Analyzer-1

MODEL W1 + 465L Dissolved Ozone Analyzer - Ideal for Water Treatment applications - Features ■ Stripping Column ■ UV Absorption technique ■ Highly stable optical system ■ Microprocessor-based technology ■ Dual field programmable alarms ■ No consumables ■ Reliable, repeatable and accurate The Model W1, combined with a Model 465L Ozone Analyzer, continuously measures dissolved ozone concentrations in the liquid phase. It uses the stripping column method with advanced electronics design, to deliver highly accurate and stable readings of dissolved ozone. This dissolved ozone analyzer is typically used in measuring dissolved ozone in drinking water, wastewater and DI water applications in a wide range of industries. Applications ■ Drinking Water Plants ■ Bottling Plants - Water or Beverage ■ Pharmaceutical Plants ■ Water Treatment Plants & more TELEDYNE APIEverywhereyoulook"

Open the catalog to page 1

Model W1 + 465L Dissolved Ozone Analyzer-2

— OZONE iNSTRUMENTATiON FOR EVERY APPLiCATiON — 1 Specifications subject to change without notice. All specifications are based on constant conditions. Printed documents are uncontrolled. SAL000097A (DCN 7917) 07.16.18 TELEDYNE APIEverywhereyoulook 9970 Carroll Canyon Road, San Diego, CA 92131 • USA Tel. 858-657-9800 • [email protected] www.teledyne-api.com © 2018 Teledyne API

Open the catalog to page 2

All Teledyne API catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list