ADVANCED POLLUTION INSTRUMENTATION Model TIOO UV Fluorescence S02 Analyzer The Model T100 uses the proven UV fluorescence principle, coupled with a state of the art user interface to provide easy, accurate, and dependable measurements of low level S02. Exceptional stability is achieved with the use of an optical shutter to compensate for PMT drift and a reference detector to correct for changes in UV lamp intensity. A hydrocarbon 'kicker' and advanced optical design combine to prevent inaccuracies due All T Series instruments offer an advanced color display, capacitive touch screen, intuitive user interface, flexible I/O, and built-in data acquisition capability. All instrument set up, control and access to stored data and diagnostic information is available through the front panel, or via RS232, Ethernet, or USB com ports either locally or by remote connection using the included APIcom™ software. user selectable ►► Dual ranges and auto ranging ►► Large, vivid, and durable color graphics display with touch screen ►► Front panel USB connections for peripheral devices and firmware ►► 8 analog inputs (optional) ►► Adaptive signal filtering optimizes response time ►► Internal zero & span check ►► Comprehensive internal data logging with programmable averaging periods ►► Ability to log virtually any operating Free Custom&r Support by t&l&phon& and email for the life of the instrument

How to Order Model T100 includes: General Ranges: Min: 0-50 ppb Full scale Max: 0-20,000 ppb Full scale (selectable, dual ranges and auto ranging supported) ppb, ppm, μg/m3, mg/m3 (selectable) < 0.2 ppb (RMS) < 0.5% of reading (RMS) above 50 ppb 0.4 ppb < 0.5 ppb/24 hours < 0.5% of full scale/24 hours 20 seconds < 100 seconds to 95% 1% of full scale 0.5% of reading above 50 ppb 650 cm3/min ±10% Measurement Units: Zero Noise: Span Noise: Lower Detectable Limit: Zero Drift: Span Drift: Lag Time: Rise and Fall Time: Linearity: Precision: Sample Flow Rate: Two year warranty Internal pump or external...